Worrying the three phase stator to a rectifier
Hi
I have swapped engine in my bike and me engine is dc cdi and it's stator has 12 poles coils.
It had 3 wires coming from its stator yellow color and two words from the pulsar coil. The yellow wires were slightly short and brittle so I replaced them.
No I have brought a 3 phase regulator. The regulator has two connectors each had three wires
One g connector has 3 yellow wires and other has o one green one red one black.
Can I connect any yellow to any yellow or thos had to be specific? In that case I would need to know how to trace the wires.
Earlier I connected the three wires to charger rectifier and didn't connected its other cables to battery and as soon as I revved the engine the rectified blasted probable its capacitor.. What could be the reason for that too?
Regards
Re: Worrying the three phase stator to a rectifier
Re: Worrying the three phase stator to a rectifier
Use translate app (moile)/ Copyfish https://en.m.wikipedia.org/wiki/Copyfish (PC...) for the text inside images http://www.sanxin.com.cn/Exhibit/exhview.asp?pid=44
IN1/2/3 doesn't matter which is which !!! -U can tell already by stator's ohm reading. 3 wires are joined together...
Black is called as "control" line which samples the voltage. If u do something stupid, it may boils the battery ... Example: http://do.ejdz.cn:8087/%E6%91%A9%E6%...3%E5%9B%BE.gif
REd + out
green -
Re: Worrying the three phase stator to a rectifier
Quote:
Originally Posted by
humanbeing
Is the black wire input or output wire?
Is it regulates current output of stator?
Any detail description of this wire function?