Printable View
Hi guys i got LEXMOTO XTRS 2014 need to install lexteh alarm with immobilizer but i can't find the plug and play sokcet for it i found one under the guagues but thats just for the guages when i plug it in there it don't work could you tell me where i can locate the control box or the right socket to fit the alarm
also don't know if this is the section to post
best regards
Adrian from london :)
Generic chinese stuff use square 8 pin (size ~2cm)
https://img.alicdn.com/imgextra/i2/1...1598635796.jpg
===
If can't p&p, tap it to the right wire(s)
+ (Alarm's energy source. U can hide it as secret as possible, theft can't find & cut at once... )/ - / Blinker(s) | [IGN off ] | + that controlled by lock s/w (example BLACK near lock / brake s/w etc) | starter solenoid (+)
so i found this one near the headloght but when i plug it in it don't work and that is bassicaly for the speedo and is there one more of this on the bike? best regards,
Adrian
P&p connector can be found under the seat or inside the headlight...
----
http://img.alicdn.com/imgextra/i2/15...1598635796.jpg
so there should be one spare one just to connect the alarm???? or can i get a splitter 8 pin??
because i found the connector but there is only one if i disconnect it then i cant have the speedo working etc
Some model had p&p connector, some don't . Ask local dealer/ official importer for details...Quote:
Originally Posted by MoAZeR
Quote:
http://www.ebay.co.uk/itm/181695613981
If your vehicle hasn't got the appropriate 9-pin connector then the alarm will need to be wired directly into your vehicle's existing loom