CFMoto 650NK Starter problem
Hey everyone, Could I ask please advise on a startup fault as bike wont start on pressing ignition button, lights on ok, battery ok, fuses ok, wont start, just a no effect from the ignition button. when turning the key on there is no sound of fuel pump and no start up efi test routine showing but the other instrument lights and such are fine, Can anybody suggest a line of things I should be checking? I thought maybe clutch cut off or transmission cut off but theres no fuel pump or start up test which if im not wrong occurs first whether the clutch engaged or in gear anyway. has anybody had similar? should i be looking at ignition system or fuel pump??
Regards from Argentina
Re: CFMoto 650NK Starter problem
First thought - battery. Drained too low to turn over engine, but enough power to run the dash lights?
2nd thought - kill switch on or wiring in it toasted (as above).
3rd thought - Some random disconnected wire, check on bar switch gear and around starter motor.
Re: CFMoto 650NK Starter problem
Quote:
Originally Posted by
ShuBen
Kill switch ?
Sent from my GN8003 using Tapatalk
Quote:
Originally Posted by
ZMC888
First thought - battery. Drained too low to turn over engine, but enough power to run the dash lights?
2nd thought - kill switch on or wiring in it toasted (as above).
3rd thought - Some random disconnected wire, check on bar switch gear and around starter motor.
Thank you, today inspect the wiring, the kill switch, and everything looks without problem, I could not test the battery power or the conductivity of the wiring.
If the fuel pump relay fails, does the EFI check work the same?
Greetings.
