1 Attachment(s)
Re: Motorcycle Show Warsaw Poland 2015
Quote:
Originally Posted by
MJH
You are very observant, there are two sites one in Mandarin and one in English. The bikes are not the same on both.
Yes, yes.... I'm observant all over my body. :lol8:
No, I don't mean in that way - two versions of "Benda" site and two product ranges. Go to English version news section and find photos from 2013 Canton fair. First photo, behind a guy with a laptop, classic green bike with GS clone engine - that's one. Next photo, bottom left portion, also classic bike, but with CM clone (or maybe CB 125 T), twin engine. That's two. Same photo, center, this dark red bike with side bags. That's three. Next photo, second and third bike taken from different angle. All three bikes look to me quite decent.
Quote:
Originally Posted by
MJH
Here is the real deal...
The Benda takes allot of the design elements that make the Triumph Speed Triple unique.
Yes, they also took those ugly saucer-eyed headlights. Unfortunately. :puke:
What attracted my attention at first, are those "gills" under the tank and trelis swingarm, аnd only afterwards I noticed these elements borrowed from Triumph's bike.
I hope that we will see this, not prototype, but production bike, somewhere - Poland, Argentina, Russia... no matter where. It would be a pity if the bike remain forgotten. I don't like stillborn projects, especially if they are... glaring and unusual for C-moto industry.
Fingers crossed "Benda"!
And you too "Fekon" with your "Carlo" 250.
Attachment 16921
Re: Motorcycle Show Warsaw Poland 2015
Re: Motorcycle Show Warsaw Poland 2015
Re: Motorcycle Show Warsaw Poland 2015
these people were at one time selling the twin above with a 125cc,
2,390.00 EUR |
= |
2,525.25 USD |
Zhejiang Changling BenJian Vehicle Co.,Ltd
Re: Motorcycle Show Warsaw Poland 2015
Looking at fottpegs position, rake angle, seat height and generally the whole geometry of the motorcycle, I concluded that this bike is neither American nor European form factor. It' is something in between - Atlantic bike. :icon10:
Re: Motorcycle Show Warsaw Poland 2015
I was yesterday in a motorcycle shop in my city. There are standing 11 bikes of the 125ccm segment.
After this visit i know something more.
Barton TZ 125 WMI is LGV
Benyco BR 125 and Rapid WMI is LTZ.
Benyco Dark Star WMI is LBX.
Re: Motorcycle Show Warsaw Poland 2015
Quote:
Originally Posted by
Zorge
Looking at fottpegs position, rake angle, seat height and generally the whole geometry of the motorcycle, I concluded that this bike is neither American nor European form factor. It' is something in between - Atlantic bike. :icon10:
They modified a Honda Rebel, they made it more horizontal. I do not like the seat or the rear fender.
if they went that far they should have went a bit further.
http://images.triumphmotorcycles.com...1706.png?w=600
http://i784.photobucket.com/albums/y...PA_chopper.jpg
Re: Motorcycle Show Warsaw Poland 2015
Quote:
Originally Posted by
beniamin82
I was yesterday in a motorcycle shop in my city. There are standing 11 bikes of the 125ccm segment.
After this visit i know something more.
Barton TZ 125 WMI is LGV
Benyco BR 125 and Rapid WMI is LTZ.
Benyco Dark Star WMI is LBX.
Barton TZ 125 WMI is LGV (Heshan Guoji Nanlian Motorcycle Industry)
Benyco BR 125 and Rapid WMI is LTZ. (Foshan Nanhai Zhongmo Science & Tech)
Benyco Dark Star WMI is LBX.( KINROAD XINTIAN MOTORCYCLE MANUFACTURE CO., LTD
Re: Motorcycle Show Warsaw Poland 2015
It is obvious who manufactures the Junak NK650…a real good article about CFMOTO
18,999.00 PLN |
= |
4,914.54 USD |
http://motocykle-lodz.pl/uploads/gal..._39_173117.jpg
I am more then a casual observer and less then a total expert...that article is pretty spot on, with acceptation to the claim that CFMOTO does not sell as re-branded models in the global market, when in fact they do.
Re: Motorcycle Show Warsaw Poland 2015