Qlink XF200 44 tooth rear sprocket.

First of all, are you sure that you have the Qingqi or Pioneer bike?, In 2006 Qlink changed their XF-ranger from the Zongshen made Yamaha TW200-clone to the Qingqi or Pioneer Suzuki-based bike named XF200.

The Qingqi / Pioneer Suzuki-based model looks like this:

http://www.qlinkmotor.com/CGI-BIN/46_2.jpg

The previous model, made by Zongshen looked like this:

http://www.motorcycles.pro/images/qlink_xranger_200.jpg



Assuming that it is the Qingqi model and you have the 428 size chain on yours, the correct Suzuki part number for a 44-tooth sprocket is:

64511-48700 It fits models: TS125ERN / ERT / ERZ

And if you want to get it from JT Sprockets, the number is JTR809.44

However I've found great difficulty in finding this and instead part number 64511-48001 also 44 tooth and for a DS100,DS125, TS100, TS125 (1978-79) will also fit.

the number you've quoted for the 42 tooth one is should be correct, but I fear the gearing will be too high for the power output of the bike. I could be wrong though.

To ascertain what chain you have, measure it: The 428 chain has a 1/2" pitch and the 520 has 5/8" pitch.This is the measurement between pins or rivets.

The dimensions of the sprocket are:

http://www.telecable.es/personales/a...20sprocket.jpg

I think it 2006 it was the ZongShen model? Can anyone confirm?

CC

In Australia, the 2006 Zongshen LZX200GY looked the same as the black Qlink above except for decals (obviously), exhaust and enduro tyres.

HI I JUST RECIEVED THE RIGHT 44 TOOTH REAR SPROCKET FROM SUZUKI FOR MY XF200 AND THE NEW NUMBER IS 64511-48001 , CANT WAIT TO HAVE TIME TO PUT IT ON AND BE ABLE TO RIDE ON THE FREEWAY WITHOUT BLOWING UP THE MOTOR. KURT THE BUTCHER!:thumbsup::riding: