.
.
I plan to do costom made Rear Silencer as below pic.
The stock exhaust pipe will replace by Stainless Steel.
I shall do this u/g, as prepare for the engine performance in the future.
http://i164.photobucket.com/albums/u...-26_172350.jpg
Printable View
.
.
I plan to do costom made Rear Silencer as below pic.
The stock exhaust pipe will replace by Stainless Steel.
I shall do this u/g, as prepare for the engine performance in the future.
http://i164.photobucket.com/albums/u...-26_172350.jpg
are there any DB limits over there in thailand, my exhaust is illegal since its louder than the 94DB limit and is actually stamped for offroad use but iv become ascutom to getting past police without them noticeing its too loud, having a straight through exhaust made a huge difference to my bike no catalytic converter meaning there isnt a huge build up in heat reducing back pressure plus allows for some nice crackiling back fire out the exhaust.
im starting to like scorpion exhausts allot more especially how they've started to design them with performance and looks in mind now
Attachment 5392they do exhausts for 125's all the way up to 1000cc superbikes
Yes, it is 92db@1metre
All the big company they sold out the cost is too high as they have to pay for Marketing.
You can see silencer in page 3 installed into KSR110, they are over size for 110cc engine but free flow.
I was thinking to hve the muffler shop to the custom made for me or I hve a choice to select already made one
with straight pipe free flow or I may get SuperTrap of USA in the second hand shop as they cost all very close (around USD 80.-)
Plus stainless steel exhaust pipe will cost around USD 100.-
.....Fueling
I filled up my CB750 with E20 since I got the bike, just the last 2 tanks filled with E10
Now I just notice I lose the power in all rpm range plus the sound of engine is more gentle.
I use to filled up with E35 (E85 mix with E20) I get harder to start as I did not do the tunning.
Tonight I will fill up with E20 and let you guy know how my engine respond.....
Cheers
Kot
ahh iv finally found the skyteam which is a replica to that honda you posted earliar
http://skyteam.en.alibaba.com/produc...APPROVAL_.html
available in either 50cc or 125 engine form
Attachment 5403
.
.
Hi,
In my country called, Tiger TT150. Unfortunatly never import as I believe it not passing the emission test.
These pic.
http://4.bp.blogspot.com/_fc7SsiuL7N...r-TT150-00.jpg
http://4.bp.blogspot.com/_fc7SsiuL7N...r-TT150-01.jpg
http://2.bp.blogspot.com/_fc7SsiuL7N...r-TT150-02.jpg
Today I bought a hand guard and installed at the shop.
Register plate is at the HQ will pass to dealer on Monday. I can pick up the bike then......
This is the VIN number at the chassis....
LLCJYL2C99B200001
If anyone could tell which factory assemble this bike.
ftp://ftp.nhtsa.dot.gov/mfrmail/ORG4773.pdf
Kinlon is the manufacturer a division of Loncin.
Hi,
M.Tks to MJH for those info it is very usful.
I pick up the bike on 7/Sep/11 and will do the review in city riding with photo.
Cheers
Kot
Hi,
Just pick up the bike on Wed 7 Sep 11 in the afternoon. After that it was raining like dog and cat.....
This morning I arrived at working place and took some picture with what I plan....
><((((º>.:" Review MB JL200GY-2C <º))))><
Hand Guard installed / Unique document holder / SS License plate cover /
Pic taken with mobile phone, the quality is not too good due to poor lighting
At parking space
http://i164.photobucket.com/albums/u...9-09075140.jpg
Unique document holder, just bolt up down here
http://i164.photobucket.com/albums/u...9-09075156.jpg
Hand guard in blue, I also bought another style hand guard in black which I think look better than this one
http://i164.photobucket.com/albums/u...9-09075213.jpg
Plate 993....Lucky me...some elder told me the sum is 21 means accident free....Ahhhh
http://i164.photobucket.com/albums/u...9-09075245.jpg
Gear shifter a short one, will fine replacment with CNC and foldable
http://i164.photobucket.com/albums/u...9-09075310.jpg
Front brake require bedding
http://i164.photobucket.com/albums/u...9-09075335.jpg
REar brake was stuck right after I left the shop. Had to adjust the the master pump.
Positive way was already bedding In by this accident malfunctional of poor adjusting from factory.
http://i164.photobucket.com/albums/u...9-09075447.jpg
I also look forward to these stuff....
1/ CNC lever
2/ Hydrolic clutch system
3/ fold gear shifter
4/ stainless Steel bolts
5/ Change alualloy wheel and new street tyre
http://i1033.photobucket.com/albums/...r/a37c2993.jpg
http://lh3.ggpht.com/_HUIkqaPJZr8/Sz...00/1168_10.JPG
http://lh5.ggpht.com/_HUIkqaPJZr8/Sz...00/137a_10.JPG
http://lh4.ggpht.com/_HUIkqaPJZr8/Sw...er%20lever.jpg
Spec of the gear ratio, Primary, Final
http://i164.photobucket.com/albums/u...0GY_2C_1-1.jpg
Speed comparision of stock 13 sprocket VS sprocket 15 teeth
http://i164.photobucket.com/albums/u...eJL20GY_2C.jpg
Tz afternoon I went to the shop to mod the seat hight.
Cut out the sponge about 20mm and put new seat cover.
Stock seat cover is suck....very thin and easily tear down.
http://i164.photobucket.com/albums/u...9-09151754.jpg
http://i164.photobucket.com/albums/u...9-09151736.jpg
Compare the material which look better. Selected the cover look like 3M sticker
http://i164.photobucket.com/albums/u...9-09151707.jpg
Back to working place and took pic of the job well done.
I was thinking to do the cover in Blue color at later stage
http://i164.photobucket.com/albums/u...9-09162502.jpg
http://i164.photobucket.com/albums/u...9-09162445.jpg
http://i164.photobucket.com/albums/u...9-09162533.jpg
Another ser of Hand guard in black
Made of alualloy very light
I saw one with alu CNC, so handy and pretty but the price >USD 100.....so I had to back off
http://i164.photobucket.com/albums/u...9-07143921.jpg
http://i164.photobucket.com/albums/u...9-07143908.jpg
nice looking seat there wants the comfort like?
only a few days youve had it and youve done quite a few bits and bobs :)
Seat quite hard as i use stock sponge, just low a little.
More things to do and costly !!!
This morning I went to the shop to change all stainless steel bolts.
Took me 3 hours and I got back this old bolts.....
4 front engine bolts I use the high strangth black bolts.
The shop dont hve rear engine bolts as it is a long one.
http://i164.photobucket.com/albums/u...9-10172020.jpg
sample pic
http://i164.photobucket.com/albums/u...9-10171912.jpg
http://i164.photobucket.com/albums/u...9-10171749.jpg
After 65 kms on the clock, I decide to do the engine lub change.
Look at the colour of the old lub.....
http://i164.photobucket.com/albums/u...9-10175804.jpg
Closer
http://i164.photobucket.com/albums/u...9-10175755.jpg
Closest
http://i164.photobucket.com/albums/u...9-10175821.jpg
Fill up 1.1 ltr with this one, cost Thb 1650.- per gallon of 6 ltr.
http://i164.photobucket.com/albums/u...9-10175838.jpg
Start engine and allow idle for 10 min, test ride for 2 kms
.....feel like diff engine. Smooth, quiet, easy to shift. Didnt test speed
or accelerate. I dont have case of slip clutch when using Molidinum or
friction modifier solution added into the current lub when using in the wet clutch system.
Tz morning went to decor shop got 3 things back
Front brake cover. CNC in gold for 3.5 bucks
http://i164.photobucket.com/albums/u...9-11142931.jpg
http://i164.photobucket.com/albums/u...9-11142921.jpg
Brake and clutch lever anti slip made of silicone in RED
http://i164.photobucket.com/albums/u...9-11142911.jpg
http://i164.photobucket.com/albums/u...9-11142943.jpg
Got refexable sticker in light blue and Sticker Honda Racing Team
Took out tank and side cover and remove stock sticker out
after the job is done, she look much better. Now if anyone ask what bike I will tell them its Honda XL200R Ahhhhhh
http://i164.photobucket.com/albums/u...9-11142851.jpg
http://i164.photobucket.com/albums/u...9-11143517.jpg
http://i164.photobucket.com/albums/u...9-11143011.jpg
http://i164.photobucket.com/albums/u...9-11142953.jpg
http://i164.photobucket.com/albums/u...9-11143445.jpg
http://i164.photobucket.com/albums/u...9-11143428.jpg
http://i164.photobucket.com/albums/u...9-11143116.jpg
CB750 is next full with dust....
http://i164.photobucket.com/albums/u...9-11143025.jpg
Now it is 86 km on the clock.....
At 84 km the front brake got better respond, so the bedding in is almost finish.
I hit the brake at low speed and front wheel lock up, but still I have to brake hard it should be lighter press the lever.
Let wait and see after full bedding in.
Start up at cold start, fire up just in 1 start but very low rpm and if I let it idle for 10-15 sec it stop.
At middle warm I rpm is a bit higher. At fully warm (Hot) the rpm around 1500 I feel too high.
I want to know how many turn on the Air Screw at the carb, the air screw at the buttom so i have
to take all bolts out and check, it was 2 turn. So I adjust ot 1 turn.
Star up the engine and got better respond. Went for a test ride and got better touqure at low rpm.
Next I will try with 1/2 turn.
FYI
Hi,
I have this very same model (I sent Kot a PM earlier to find out more about this bike). Good idea changing the bolts to stainless, thank you!
I think I will also lower it just a bit.
If I have anything else done, I'll let you know.
Thanks again...
Cradle frame look similar to XL200 Year 2001 รุ่นนี้ครับ ประกอบที่ Brazil
http://picx.totalecuador.com/s/Honda...reme_Adventrue
Compare to my bike
http://i164.photobucket.com/albums/u...9-11142851.jpg
But to outside look similar to Honda NXR 150 Bros Year 08/2011 of India and Brazil (PGM-Fi from 09)
http://asmarantaka.files.wordpress.c...-1500-bros.jpg
The bike copy by Chinese looks very much like it....
http://i164.photobucket.com/albums/u...8-16170357.jpg
Hi...Glad I can provide some help. Post your pic pls.Quote:
Originally Posted by kicking
Kot
.
.
.
I got the rear pag foot rest from Kawasaki ZX9 for a long time
Mod is required.
It will look nice on the bike replacing the black metal one.
http://i164.photobucket.com/albums/u...9-12133050.jpg
-Rode 78 Km and filled up 2.9 lte. Avg 26.9 km/ltr in traffic of BKK city, positive result.
-Remove 1 bolt at the cylinder head to frame to reduce deep shake at high RPM
-Mod the stock muffler, used 10mm drill all the way throuh and now got better flow
Before to get up to 90 KM/hr take awhile. Now I can hit 101 KM/hr easily.
FYI
- looking for the Handlebar raiser but could not find one yet. This I want to low the front fork down 2 inches
http://image.ohozaa.com/i/9e1/barmounts_fatrc.jpg
-Got new brake / clutch lever for CBR150r
Brake lever can fit without problem
Clutch can not, got to but bracket of CBR150 and replace the whole set
-Got new rear shock for Honda Fighter HX135
-Got the engine rev guage, will install at weekend
http://i164.photobucket.com/albums/u...9-14173458.jpg
http://i164.photobucket.com/albums/u...9-14191201.jpg
http://i164.photobucket.com/albums/u...9-14191227.jpg
http://i164.photobucket.com/albums/u...9-14191250.jpg
Clutch Lever and Bracket installed,
Front brake lever installed,
http://i164.photobucket.com/albums/u...9-14181807.jpg
http://i164.photobucket.com/albums/u...9-14181757.jpg
http://i164.photobucket.com/albums/u...9-14181740.jpg
http://i164.photobucket.com/albums/u...9-14173443.jpg
http://i164.photobucket.com/albums/u...9-14173506.jpg
Got the handlebar riser
http://i164.photobucket.com/albums/u...9-15181942.jpg
installed, work done last night.
Just got time to take pic in the morning at working place.
Front lower by 1 1/2 inch
http://i164.photobucket.com/albums/u...9-16082914.jpg
http://i164.photobucket.com/albums/u...9-16082958.jpg
http://i164.photobucket.com/albums/u...9-16083016.jpg
http://i164.photobucket.com/albums/u...9-16083032.jpg
http://i164.photobucket.com/albums/u...9-16083104.jpg
http://i164.photobucket.com/albums/u...9-16083118.jpg
http://i164.photobucket.com/albums/u...9-16083555.jpg
i would suggest a nice bar pad to set off the offroad looks abit more but it looks like your strengthening bar is too close to the handle abrs themselves to fit one
Easy Sunday, went to the weekend market and got some stuff
http://i164.photobucket.com/albums/u...9-18130546.jpg
Cut the red alu into 2 pcs and installed as part of the rear foot rest from ZX9R
Look nicer after the job is done.
http://i164.photobucket.com/albums/u...9-18145044.jpg
http://i164.photobucket.com/albums/u...9-18145032.jpg
New look with new stickers and rear foot rest
http://i164.photobucket.com/albums/u...9-18145108.jpg
http://i164.photobucket.com/albums/u...9-18155336.jpg