My Review of the CFMOTO 650NK

Thanks for your feedback mates, any idea of which clutch could fit my 650NK?

could you get a take your lever off for a picture?

Kennon

Quote:

---

Originally Posted by Topmanda

Oy mates, I'm looking to change both of my levers (brakes and clutch) on my 650nk: could someone advise me a lever's brand that would fit my nk? I could tobao it.

---

You might be interested in these on taobao ... they look nice, but I cannot advise as to the functionality of the levers.

Attachment 11297

1. Taobao dealer with several levers for the 650nk 元198
Attachment 11300

2. Taobao dealer with several levers for the 650nk 元299
Attachment 11301

3. Taobao dealer with levers for the 650nk 元169.90

4. Taobao dealer with levers for the 650nk 元158
Attachment 11302

Thank you for our insight bikerdoc, I might buy the 299rmb one you're advising and see wheter they fit. I will tell you guys if they're functionnal.

Kennon, here the pictures of the clutch lever of my 650 NKAttachment 11322

By the way I bought the horns felix advised:
http://item.taobao.com/item.htm?spm=...id=12610507306

They're loud, discreet and efficient: I clearly recommend them.

Cheers!


T.

the levers bikerdoc posted look right for the fitment, I had abit of trouble fitting mine to my honda with the clutch cable forgot to loosen it up but work allot better now. The first two links have adjustible length I wouldn't go for those as they are quite flmsey better of going for the soild stubby to full length ones my bike originally had too heavy a clutch so changing the lever to a long adjustible made it allot better on city rides.
Kennon

Guys,


thanks again for your advices, I successfully installed the levers Bikerdoc recommended, they are fitting perfectly, good grip, material seems solid, here is the result with the new levers:
Attachment 11367

Hi Guys, any ideas of which handle grips might fit the bike? The standard one are unesthetic and not durable (the rub is already wearing off).

Hey Guys,

I was thinking about replacing my grips (the rubber is wearing off) with the Scott's one.
Any idea if it'll fit? Here's the link:
http://item.taobao.com/item.htm?spm=...id=15837174753

Cheers!


Attachment 11637

It is very likely that, if you buy the proper diameter grips (I guess that is 7/8 inches on your bike, so, in metric, left shoul be 22 mm, and right, throttle grip, some 25 mm), you'll be able to install them. However, you should pay attention and order grips open at both ends or to modify these colorful, with closed end.