Hi
JTC please report the power gains that you have from that exhaust system!
Cheers
Printable View
Hi
JTC please report the power gains that you have from that exhaust system!
Cheers
Hahahahaha ok superfamous - I can report on my likes about it, but I will not have anything to compare it to, because The Bike is Brand NEW 0 miles and the stock exhaust is coming off and the new One going on before It ever gets a drop of gas in her. LOL
Ok I just posted some updated pics here:
http://www.chinariders.net/modules.p...1310&highlight=
Andrew
I posted over there too but as we have the Pulse Adrenaline lads here that have been asking about mufflers, I thought I should say something here. I am looking forward to see it on and running! Lets hope you get Sunday off to so this.
Surely that snow has got to melt soon?
It is shorter than the one you first showed us, and from a 125, will it not restrict the 200cc a bit? Barnone didn't get any improvement with his shorty, I wonder if that is why?
tuned!
Here is my write up:
http://chinariders.net/modules.php?n...=116205#116205
Enjoy! - Andrew
Here are all the Pictures:
http://s1238.photobucket.com/albums/...0T4%20Exhaust/
Andrew
I Used to use xian racing about a year ago. But it looks like they have closed down. I was wondering if they have moved or if there is a similar site with similar products?
Updated Pro Circuit T4 Video: http://www.youtube.com/watch?v=tKk8vYeE1Tg
Andrew
Very good Sound!Quote:
Originally Posted by JTC
Any suggestions on how to make a blanking plate for the SAI removal on an XF200?
1/8" aluminum plate using the gasket as a pattern.Quote:
Originally Posted by Moonbloodsflow
What do I use to cut it out with cleanly?Quote:
Originally Posted by barnone
I used a hacksaw to rough it out and a file to smooth it.
I'll try the same, maybe use the jig saw at first. Thanks for the advice.Quote:
Originally Posted by barnone
I made my own cheap exhaust for my QM200GY engined Yamaha DT.
I fabricated the downpipe from car exhaust tubing. For the silencer, I fully emptied the stock Qingqi silencer and cut it shorter. I managed to find some tubing which was perfectly sized to make a slip-on joint between the downpipe and the silencer. I made a perforated pipe out of vacuum cleaner's chromed pipe by drilling holes in it one by one. It was easy to fit as these tubes have bigger diameter part in one end. I left the catalyzer tube in the stock exhaust but slammed the honeycomb thing out of it to let the gases flow free. The vacuum cleaners tube fitted perfectly on it with it's bigger diameter end and the other end fitted the hole in the endcap, I just had to measure and cut the tube to fit the length perfectly. After all this was done, I put my handmade perforated tube in the silencer, slammed a lot of exhaust wool between the tube and the shell. After that I fitted the endcap and the thing was all ready to go.
It's really quiet when idling and its also quiet when cruising slowly. When accelarating, or riding on more than 1/3 of throttle, it starts to scream a bit. I would record a vido of my bike riding but I dont have anyone who can handle the camera without screwing the video up...
Attachment 4508Attachment 4509Attachment 4510http://static1.fotoalbum.ee/fotoalbu...048299011c.jpg