Printable View
Let me know how it goes when you test it.Yip ive pushed it a little been using the bike non stop trying to run it in ,i've changed the jetting on the carb and tweaked a few bits here and there just need to change the gearing to see the potential top end wise but i can feel the diffrence in every gear its got a ton more power,infact im very shocked the kit has made as much diffrence as its done tbh i feel more safer on the road with the bike now its got that extra power :)
Piston + RingsQuote:
Originally Posted by Biker1234
(ALL flat) http://item.taobao.com/item.htm?id=12990211223
http://item.taobao.com/item.htm?id=16255707353
---
(Rings) SAME size (1.2/1.2/2.5) as STD 62mm chinese CG150
Reliable brands
Riken http://www.riken.com.cn/ http://item.taobao.com/item.htm?id=3234140003
DY http://www.dongya.cn/ http://item.taobao.com/item.htm?id=22722572123
ATG http://www.aqatg.com/ http://item.taobao.com/item.htm?id=9037805991
Thanks humanbeing much appreciated :)
goign for a run out today
Attachment 14567 small update on my rmr I've installed a new front headlight,changed the sproket set up,decided to paint the 150cc big bore cylinder block red with heat resistant paint,fitted a 115 main jet and bigger pilot jet getting 75-80 mph with my kit now it's ran in ..Oh and I fitted some stickers here and there to cover up scratches on the back panels .Next up is a back drum brake to disc brake conversion and custom tail tidy ..still to fit a new seat and finish the vinyl but not had that much time ,also got a new Chinese bike project I'm starting soon
Hi there mate with your stickers do you have to coat them in lacquer or are they fine as they are?
Hey there,if you mean the Vinyl its just a case of measuring it and cutting it out to fit the pannels and once done just peel back the other end and stick on carefully to make sure you dont get bubbles in it nothing else needed :)
Ok thanks mate i was not sure if you have to cover with lacquer so that they will survive the bad weather?
Also have you got a link to the race cdi that you have?
Thanks
No need to cover the vinyl with lacquer it's got a 7 year life span and is suitable for in door and out door use, it's already protected so no worries :) I got my race cdi of eBay at the start of the year by fluke but they no longer do them ,you'd need to import one from China using taobue which is quite easy and shuld only take a few weeks to arrive if you select ems shipping !im sure there's a link to the cdi on this forum you could inbox spencer2004 or humanbeing there good with the links to parts if you can't find it
Nice thred here, exactly what I have been looking for... Graphics, Speedo and potential big bore on my Sinnis Apache.
Cheers Gents.