can someone tell what PC_E means and what do I do as I don't have a PC_E wire on my cdi? cheers!Quote:
Originally Posted by humanbeing
Printable View
can someone tell what PC_E means and what do I do as I don't have a PC_E wire on my cdi? cheers!Quote:
Originally Posted by humanbeing
PC_E= Pickup (Trigger ...) - . In the "8 pin" = joined together to GND in somewhere
---
http://item.taobao.com/item.htm?id=40831081763
Human being
How do I search for a front disc for my 150GY? Nothing o do comes up on Taobao
Also a front caliper or just the bracket
Something not straight or square on mine might not even be in caliper as I did replace it but the mounting bracket wasn't replaced as couldn't find correct caliper with my bracket type
Think my caliper is EN 125 Suzuki?
any ideas where im gonna be able to send a wire from to this for cdi work please?Quote:
Originally Posted by humanbeing
Confused at your issue and questionQuote:
Originally Posted by impulsive
EN125-2A
Attachment 16284
---
GS125
http://do.ejdz.cn:8087/%E6%91%A9%E6%...3%E5%9B%BE.gif
well I know its the earth of the pickup sensor, but where do I run a wire from, straight from the pickup sensor or after it has gone to the regulator not sure!Quote:
Originally Posted by NZBrakelathes
Isn't that the kill switch?Quote:
Originally Posted by impulsive
Earth out kills motor?!
im not sure still not certain what I should do here :(Quote:
Originally Posted by NZBrakelathes
Leave earth wire off motor runs
Earth it that stops the engine
Try it
My bike will start without the ignition barrel connected
Easy to steal really