Printable View
i`m from Honduras and i have a kmf ZX200 i`m asking if somebody can tell me from a exhaust for this bike make a new thread because i`ve searched everywhere in this forum and i didn`t see this model so if anyone can help me that would be nice
Attachment 4503
is not a great picture it was taken with an 20$ cellphone that one in the back is the same model with diferent tires it looks like the Qingqi 200gy (or supermotartd i think)
I know you don't like this answer and I partially agree that this is a stupid answer, but anyway, you already have exhaust thing on your bike I see from the pic, so there is no need to buy a new.
no so much of a estupid question, it's more like i may have ask the wrong quiestion
anyway
what i whas trying to say was an: another exhaust like a fmf or something like that and i was looking for opinions
or to make it simple i want another exhaust for this bike one the make some noise :)
because some one tell me i should drill some hole on the end cap but i want something that looks good
You should be able to put practically any muffler on it you can find. Some of them may require additional tweaking though. If you want to be sure the the new muffler is louder and "better", just get a muffler from 250cc MX or real enduro racing bike :naughty:
thanks for the advice, but just to be clear what brand should i go for ??
thanks for every thing
Doesn't really matter what brand you pick. All you need is the muffler and some good mechanic who just grins and puts it on your bike while you smoke tobacco. Four strokes are easy as that. Two strokes are a different story.
Your bike is made by Qingqi and the FMF exhaust will fit. Do a search here for FMF amd see what others have done.
getting a free flowing exhaust is pretty much the same as removing the baffles and the catalytic converter from the standard system easily done just abit of cut and shut
but i know you can get a GPR ,FMF exhaust can for the suzuki DR200 engine thats used in this bike also if you want to make your bike look proper smart they make a standard down pipe in chromed stainless steel now qingqi the proper manufacturer of this bike.
Attachment 4536
here's a link to see what the FMF slip in looks like
http://www.roguemotorsportz.com/i252...ng&ad=Products
pipe in chromed stainless steel? where can i get that because that pipe with the new exhaust it`s going to look good plus my pipe it`s a lil`bit rusty and i would like to get a new oneQuote:
Originally Posted by Kennon
only place iv been told to get one from is off the dealer but over here in the UK its quite a costly option to get dont know what the tax on things is like over in hondorus best off asking the dealer
Zansax, just remember youŽll probably need to replace your stock air cleaner for something like K&N, remember you have to balance, more air out, more air in, after that youŽll probably run lean on you air/gas mixture. Solution enrich it via adjusting the C-clip on your carb, and also changing the main jet to a bigger size, depending on altitude.
Have fun!!! Cheers!!
now you lost me, i really don't understand everything of jet c-clipQuote:
Originally Posted by Lucien
but i know where is the air filter XD
Hi I have just bought this exhaust and I can see in this pic there is a mod so u can use the supplied springs. Please tell me how you have done it. I cant make it out. I know about angle grinding the brackets off and cutting slices down the connector pipe to use a jubilee type connection but still id like to keep my options open before I take a grinder to my new can lol. CheersQuote:
Originally Posted by barnone
Dude this can is made in Brazil with highest quality, it may be easier to get in Honduras:Quote:
Originally Posted by zansax
http://produto.mercadolivre.com.br/M...ss-_JM:riding:
I put this can on but I also made a new stainless link pipe - Really helps with adding a nice sound to the bike and helps airflow. Tried to change the airbox but the port from the airbox into the engine is small and would need to be bored out to make a difference
http://i255.photobucket.com/albums/h...IMAG0524-1.jpg
http://i255.photobucket.com/albums/h...IMAG0525-1.jpg
Nice Yoshi can Laurpat, good work on header pipe,was it expensive?
Not expensive - I made it myself - maybe 25 at most... Looks the part when polieshed upQuote:
Originally Posted by Lucien
thanks to all of you for the suggestions i really wanta a FMF exhaust but it cost 500$ with the delivery here in Honduras i really want that,
a few days ago i saw a exhaust named Lazer(no it's not laser this is another brand checkout their web page http://www.lazerproductos.com/index2.htm) and it sound really good and it looks nice so i'm gona use one of this for my bike thanks here is a picture of the mufflers
Attachment 5030
Attachment 5031
i think i'll go with the one that has a golden end cap