Printable View
On Thursday 12, 2012 I took delivery of my brand new Scooter, A Dongfang DF250STC (250cc).
This is my question, it was made in September 2011, and I’m looking for a parts book.
The engine was made by QINGQI 169mm #110400019. I have searched for 4 days now and
have found no information about the engine or parts. If anyone has some insight please enlighten
me.
Thanks
Attachment 6067Attachment 6068Attachment 6069Attachment 6070
Dear BBrooks,
Welcome to the forum, and, man, that's a nice looking scoot. Not sure I've ever seen a Dongfang like that here in China, ever.
Thanks for posting pix, and don't hesitate to send more. We'll be looking forward to a performance review once you put down a couple hundred miles.
I do think (and hope) someone here will be able to help find the user and/or shop manual. Why can't your dealer provide that for you?
cheers!
Maybe similar to Yamaha. http://scootdawg.proboards.com/index...t&thread=11379
Search google for this pdf: http://www.doc88.com/p-95826698815.html
Well their you go, its is a YP250P Yamaha Majesty clone, even the gauges are copied.
Yamaha never offered the Majesty 250 in the USA only the 400cc version.
This is cool. I have been looking for days and you guys knew rightaway what it was. Many Thanks. I will report back with a performance review after I break it in.
Thanks once again
Bob
On my first 100 miles I was riding in wind gusts of up to 55/mph. Not a good time. But I did notice one of
the rear tail light bulb was burned out. I didn’t think too much into this but after the battery was DOA
a few times in the driveway I broke down and bought a battery charger. Upon closer inspection the bulb
that came with the bike was a two element type. This made me think it was wired wrong. But much to my dismay, the socket was wired for a single element bulb. So the search is on for some solder less connectors to correct this. To better illustrate this, when the brake is applied all four rear lights should burn bright. But as it is now the two inner are only on when the brake is on. And the two outer do nothing. No big deal, after this I should be better acquainted with its little quirks. And one more note,
the air-cleaner hose that connects the carb to the air-cleaner seems to be way too ridged and too long.
The carb inlet compared to the air-cleaner is too far forward , so I trimmed it back and had to trim the inner diameter to fit snug. I may just end up replacing it later after I find some suitable hose.
Attachment 6108
Where did you buy? Just curious...
Quote:
Originally Posted by bbrooks1963
I will also be getting a "Pre-Owned" DF250STC I will be on the lookout for manuals and parts. Will post my findings
So far, I have found the same photo, of this same 250cc scooter, with different model numbers. The Model numbers I have found so far that seem to be the same scooter are: MC_D250D, DF250STC, and MC_D250STD. The MC_D250D, seems to be called a "Regal", and the MC_D250STD, which is supposed to be the 25cc model number, also states that the model number for that model number is MC_300STD (300cc Model!! Dont understand that one!!) and the MC_D250STC, is the one said to be found in this thread. I am currently trying to sort all of this out, and should have more info soon but so far, this is what I have found.
Dude, make sure you get a title with that Pre-owned unit. Because it's used, I would be very suspect.
Quote:
Originally Posted by jfalbino
ktmracer:.............
Sorry I didn,t get back to ya in a more timly mannor, but I bought it from ScooterDepot.us ......DON't Get anything from them or anyone even remotly relaited to them.... worst service EVER. I would never send anyone there to buy even a toster if they sold it for a dollar.
jfalbino:.... I have just the owner's manual, for the DF250STC if you need, I can turn it into a PDF and e-mail it to ya. Just say the word.
Good idea. Scooter Depot sucks. Ask Gardo about them...
Quote:
Originally Posted by bbrooks1963