Printable View
Guys, please take a very good look at this bike... coolest chinese bike ever...
http://www.superbyke.co.uk/product.p...372f2865d4d24f
Anyway some guys at UK, name some qingqi models as "Superbyke" but they also name some other chinese models under that name, and i would really like to know which brand the rmm 250 really is.
If anyone can help i would really apreciate it.
Thx people.
Those bikes are usually sold under such brand names as AGB Orion or Apollo Orion. The model number is A31A250M. Sometimes marketed as AGB30F in some countries.
These are some of the sources: http://www.made-in-china.com/showroo...r-Cooled-.html
http://apollo.en.alibaba.com/product...r_Cooled_.html
So, isnt there any unique manufacturer or at least "original" manufacturer such as qingqi or something?
Thx.
As usual Forchetto is on the money. Looks like Superbyke is really importing a good mix of bikes from different manufacturers. Their RMZ, RMR and RSR 125's are both QingQi's as well as the RMR200. I was wondering if they were being sold in Jolly ol' England.
Noticed a discrepency on the 250's though. Looks like the UK site says the tank is 6L and the manufacturers specs say 3.53 on the same model. That's a noticable difference since even 6L isn't a whole buch of fuel for a 250 anyway.
Hmmm... :confused1:.
CC
The company appears to be:Quote:
Originally Posted by posadajulian
ZHEJIANG APOLLO Sporting Products CO..LTD.
They claim to make 100,000 bikes with only 400 staff, not bad for productivity, eh?, that's over 250 bikes per employee. Their "factory" is a wonderful artists impression. The Chinese do this a lot, they must think we dabizis ("big noses") are stupid or something:
http://www.apollovehicle.com/images/factory.jpg
Their website is at: http://www.apollovehicle.com/
The bike you see in the UK Superbyke site is this one (different paint job and decals):
http://www.apollovehicle.com/product/A31A250M.html
http://www.apollovehicle.com/product...s/A31A250M.jpg
I agree with you though, these are cool-looking bikes. Too tall for me though, 940 mm seat height, I'd need a trampoline to get on that.
The frame and swing arm seem to be made of alloy. This requires quite sophisticated production facilities on account of inert gas welding, die casting, etc. I don't know much about dirt bike engines, but it doesn't seem to be a mere copy of anything I recognise. I could be wrong though.
They seem to be "inspired" on the suzuki rm 250...
http://www.suzuki-bikes.com/images/b...zuki-RM250.jpg
guess the name uncovers that... and they do look alike, dang i would love to get one... but they dont exist in my country, and i just bought a qingqi qmt 200 (qlink xf 200 in the us)... havent received it yet, will let you know how that goes for me =).
Thx for all the info bro.
i mean Qingqi QM200GY-BA Super Motard...
by the way forchetto how you been doing with yours....
So far I'm delighted with it. Runs great, has a beautiful gearbox and nimble handling, great brakes and feels very much like a Japanese bike, both in the quality of its components and the fine fit and finish. The exception being the frame paint that could be thicker and glossier, but spraying with a rust preventer helps.
It's my first cross or motard type bike, and I wish I got one earlier in my motorcycling career. Its lightness and quick handling makes me feel like a 14 year-old again!.:icon10:
Omg! cant wait to get mine! the guy at the agency just called me saying the bike arrived, they just need some paperwork done...
Will let you know as soon as i get it :p
Great!. Make sure that the pre-delivery inspection and preparation is done well. Chinese bikes need it more than Japanese.
The chain is nearly always delivered far too tight. For some reason the chinese ship them like that. Perhaps to stop them flapping about in the container. Most dealers don't even notice this, thinking that being a new bike it must be alright. Also the tyre pressures can be half of what they should be.
During the first few hundred km observe the tightness of the spokes. Mine seem to need regular tightening, not much, but a bit.
Check them by "pinging" them with a heavy screwdriver. They should feel tight and emit a musical "ping" tone. Any that emit a dull "thud" are suspect. You can confirm their looseness by wiggling them to and fro with your hand. Any movement is bad.
If you can get a suitable spoke spanner, good, but a well-fitting open ender will be OK.
Remember that the direction of tightening is anti-clockwise when viewing the wheel and spokes from a kneeling position next to the bike.
You can read the owners manual before delivery by looking at this thread in this very forum:
http://www.mychinamoto.com/forums/showthread.php?t=353
Muchas Gracias mi amigo!
Ill let you know how it goes.
Please tell me how do I take out the seat of this bike,I need to change the battery and I don't know how to reach....Is there any hidden screw or just plastic locks?
thanks
I found it!There was a hidden screw ,just one below the tail.
tmx123, what vehicle are you referring to?
I noticed a few odd things about the RMM250 from the first post. I do think that it's a nice looking bike but what is that thing hanging down if front of the shifter? It's not on all of the pictures and not on the other bikes from the other sites. Also, what's up with the tiny exhausts? Are those just tips and the main exhaust body is hidden below? I noticed too that there are one too many cables/hoses coming off of the right hand grip. I count four. There is a hose that is going over to the brake and goes down the front but also another one that is going in front of the tank. Both look like hydraulic hoses. One could be part of the throttle cable assembly but those usually are black and come from underneath the throttle.
is the copy of the KTM 450
really equal....
but with a zongshen 200cc engine
http://www.txmcross.com
thanks
I should have said 105 sx
Looks like a copy of the Aprilla RXV to me.The frame at least.Well sort of.
it's similar to this one too,you are right..but take a look at this one
http://www.ktm.com/105-SX.183.20.html
but 4 stroke instead of two...
@txm123, I think it's a KTM sx250 copy. It is the same bike as Pitpro (australia) are selling. I got one too from their manufacturer in zhejiang,china then shipped it straight to Philippines. Nice bike and can be compared to honda's XR200 in performance though mine is equipped with 230cc air cooled OHC engine, gives a lot of fun riding on. here's a pic of it.
NIce bike,and yes you are right its the same as the sx model sold here,my bike is not pictured but its closer to the 105 model. Anyway do you have a service manual for this bike?any advice?thanks
txm123 I do have that tiny booklet that comes with the bike, but dont know if I can call that a service manual, it only describes the proper way to run in a new bike, a general wiring diagram, a table which shows time intervals when to check the oil/battery/air filter and clearances for the intake/exhaust valve adjustment. no other technical descriptions on the bike and its parts. Anyway will gladly share it, send me your email by PM and will send you a copy but not til the end of next month friend as im still here in southern china at work........ :rolleyes1:
what engine your bike have? if it's same as mine(zhongshen) you can look from their website for some info's. goodluck!...
ok thanks,that manual would be of great help too,I'll keep searching for the service/workshop manual and if I find it I'd share it on the forum.
We keep in touch,byebye
Alejandro.