Printable View
Chongqing Jianshe · Yamaha Motor Co., Ltd.
Started offering a model in July 2012 specifically for the Chinese market they call it the YB125SP, its a classic standard.
http://i784.photobucket.com/albums/y...ha/YB125SP.jpg
http://i784.photobucket.com/albums/y...B125SP-BLK.jpg
http://i784.photobucket.com/albums/y...5SP-meters.jpg
http://i784.photobucket.com/albums/y...5SP-spokes.jpg
Details
Official announcement of Yamaha Motor Co., Ltd.
The releases details state that the YB125SP was designed specially for the Chinese market….but its selling in Japan? However none of the 125cc models are listed on the Yamaha Japanese website?
SR400
http://i784.photobucket.com/albums/y...maha/SR400.jpg
Anyhow…the little YB125SP looks a little like the SR400 and it would not take much imagination too see the potential in a YB250SP since the YBR250 is already available in China, still cannot figure out why they have not began production of an entire 250 line in China?
Serrow
http://i784.photobucket.com/albums/y.../Serrow250.jpg
Tricker
http://i784.photobucket.com/albums/y...Tricker250.jpg
Its pretty obvious that the Chinese domestic market is price conscious, fuel consumption and price must be what is preventing Jianshe Yamaha from offering the complete 250 line in china. That is a shame because the Tricker and Serrow seem like a logical next step... if they could get the retail prices down, they might be able if the models were mass produced. But to price conscious consumers the 250 is a luxury and consumes too much fuel.
I had a strange Yamaha experience last week. I tried to order another, new YBR250 and was told that the factory has stopped shipping them within China, but is still exporting them (don't know where). Not a big deal, because I had just taken delivery of a Suzuki GW250, and it seems to be a superior bike (and less expensive). Might switch all my YBRs over to GWs.
You should post a thread on your GW250, I was considering getting one in London and keeping it at my families farm in Ireland. If I do I will ride it there and keep it for use on holiday.
Done. :icon10:Quote:
Originally Posted by MJH
I'd like to see a review of the GW250 as well.
Jianshe Yamaha must be going after the Honda sales with this model, their target is 100,000 units a year.. The suggested retail for these is 6,680.00 that is not expensive.
Here are some versions of the YB125SP from Japan...
http://i784.photobucket.com/albums/y...ps297a3e0d.jpg
http://i784.photobucket.com/albums/y...ps95f63f9c.jpg
Yamaha has released two new models, obviously in response to the multiple offers from Honda over the last two years. Yamaha went in a different direction to Honda with their practical and typical utilitarian designs. New for 2013 and 2014 are the XV950 (Bolt) and MT-09 (FZ-09)(USA), these are aggressive looking and the FZ-09 has a new triple.
Both are being retailed in the USA for $7,990.00.
Bolt
http://i784.photobucket.com/albums/y...hmaha/img1.jpg
FZ-09
http://i784.photobucket.com/albums/y...d6f0d3c224.jpg
Yamahas partner in China; Chongqing Jianshe·Yamaha Motorcycle Co., Ltd. will be exporting their JS125-6H (V6,blade) to the UK market, it will be sold through the Sinnis brand there.
http://i784.photobucket.com/albums/y...c929fb768a.jpg
Sinnis ST 125
http://sinnismotorcycles.com/images/...20NEW!%201.jpg
Yamaha at 1st presented the 3cylinder engine at Intermot 2012,then this year said:The Dark Side Of Japan : 11 June 2013,i believe it is finally a move to fight Triumph.Also read somewhere for a new 2 cylinder engine......will see.
They are $1,300.00 less then the Street Triple here.
Here is an article, comparing the two.
http://www.motorcycledaily.com/2013/...09-850-triple/
Yamaha Jianshe have the clearest most concise website of all…
The two in tandem hold the sixth position within the fifty largest producers of motorcycles in China.
They have 5% of the total market and had marginal growth of 0.03% for the first half of 2013.
Yamaha’s Chinese website links directly to its partners site Jianshe, that has a link to China South Industries group.
Yamaha Brazil has expanded its 250cc single line of motorcycles.
Fazer 250 Blue Flex 11.810 BRL -5,227.00 USD
http://www.yamaha-motor.com.br/uploa...ca_580x450.jpg
Lander XTZ 250 12.440 BRL - 5,509.00 USD
http://www.yamaha-motor.com.br/uploa...ander_azul.jpg
XTZ 250 Tenere 13.490 BRL - 5,972.00 USD
http://www.yamaha-motor.com.br/uploa...27_580x450.jpg
The XTZ comes also in a X version Motard.
http://i784.photobucket.com/albums/y...7035d79c33.jpg
In Japan Yamaha offers two very nice v-twin cruisers…in their Drag Star Classics
DS250 589,500 JPY - 5,965.00 USD
http://i784.photobucket.com/albums/y...d2c6580e42.jpg
DS400 852,600 JPY - 8,626.00 USD
http://i784.photobucket.com/albums/y...9c129d084a.jpg
I would like to see these two drag stars manufactured in India, but also in additional versions called Bolts and in a 250 and 400 form. They need to get their global competitive set on high.
http://i784.photobucket.com/albums/y...a7a49c5349.jpg
I think that encouraging style statements is safer then performance as in high powered, they do not need to go so fast particularly for new riders. If is all about being a leisure sport then that’s all about leisurely ridding apposed to death defying. Its not about proving anything or at least it should not be.
Here's mine...
Attachment 13606
Parked in a hotel lobby... gotta luv PRC!
TIC, folks, TIC!
Quote:
Originally Posted by bikerdoc
And no oil leaks must be a good bike and whats all with the plate numbers PPPPP and the TR 88888
I have worked out the PPPPPP
Peter Piper picked a peck of pickled peppers;
A peck of pickled peppers Peter Piper picked;
If Peter Piper picked a peck of pickled peppers,
Where's the peck of pickled peppers Peter Piper picked?
But i cant work out the 88888
could you enlighten me !
I wonder if the Indian market would rather have one of these then a 500CC HD, a plus for Yamaha would be in that they could export them to the USA with little or no repercussions, they could manufacture the 250, 400 and 650 there and likley drop a grand off their retail prices in the USA and likely double the profit margin…maybe.
V Star Custom (650) $6,990.00 USD
http://cdn01.yamahamotorsports.com/i...2&class=med640
V Star 250 $4,340.00 USD
http://cdn01.yamahamotorsports.com/i...5&class=med640