Printable View
Quick question guys yes or no? I was bored made a really good job installing this still have the back panels and rear fender to do was just looking for something a bit diffrent don't like the factory decal kits so make my own Attachment 13179 it looks a lot better in person have a custom seat cover etc to so just tidying the bike up and waiting on my 150cc big bore kit :)
nice!!! i want some lol how did you do itQuote:
Originally Posted by Biker1234
It was fairly easy check this eBay item number 130851956846 lots of diffrent designs and styles for cars and motorbikes .Its just a case of taking of the tank plastics drawing round them as a template on the back of the vinyl and measuring everything like the cut outs on the plastic then cutting round them and sticking on :) cost about £8 to do so a lot cheaper and better looking than factory graphics
amazing just noticed you have a fair few extra's on your bike what cdi did you get and what main jet i have a yoshimura exhaust changed the front wavy disk to a big standard new mikuni carb led indicators and swapped out the speedo for a round chrome one
Nice upgrades you have done, i've seen a few of the Yoshi exhausts on these bikes was really tempted to put one on my bike but ended up buying the Dep s3 pipe for my bike as had one on my Yamaha DTR 125 and found it pretty nice.I got the main jet with the exhaust its 110 or 115 i think id need to double check,i also got the cdi from Ebay earlier on this year not sure the make looks a bit diffrent from the stock one made a good bit of difference in performance just search sinnis apache 125 race cdi on Ebay should come up
thanks have you got it to 150cc yet im waiting on delivery i too was going to get the dep s3 but went with the yoshi just because my friends had one did you change both jets? the jet that came with the carb was a 90 i think lol
Just changed the main jet but believe i'll need to change the pilot jet when i install the 150cc kit,my big bore kit should be here by September so i've bought my black heat resistant paint to as i think the cylinder is silver and got the Haynes manual for the bike so waiting it out :) where'd you get your kit from?
ebay i
sorry this one http://www.ebay.co.uk/itm/1309497044...84.m1439.l2649
Thats the same one as me! really looking forward to installing fingures crossed it all goes as it should lol :)
when did you place your order?
Placed on the 15th this month and he Emailed me saying i should have it by September 10th if not before.I also asked the seller to send me a spare piston and gasket just to be safe but he ignored the request lol
typical did you get a flat top piston ?Quote:
Originally Posted by Biker1234
just checked mine was dispatched on the 18th
Yip asked for the flat top piston :) ,well your kit should probs arrive round about the same time as mine ,are you installing the kit yourself ?
yeah do all my stuff myself got the haynes guide its pretty simple i usually take off stuff in such a way its impossible to get wrong when putting the new part on saying that i have one problem trying to get a rusted bolt off wont ruddy budge
just out of curiosity what sprockets you got on the bike i got 51t on the back but not checked the front thing its still stock
Nice! me too .My rear sprockets 51t and the fronts 15t so ill need to change my sprocket set up aswell to take advantage of the new kit more top end at the moment it's very quick of the mark but top end isnt good meant to change the sprokets a while ago but never got round to it
i have got a 16 t front end not even fitted want and 11t front end rather have off the mark speed than top endQuote:
Originally Posted by Biker1234
Attachment 13187 small update of the tank panels back on the bike looks okish but still need to do the back fairings but there broken/cracked and just a bit worse for ware so might try glueing them and fixing them up first or buy new ones,still need to fit my new seat cover which will tie the decals in and fit my neoprane factory racing fork protectors
nice mine got stolen last night so no more upgrades for me
No way :( hope you get your bike back,really sorry to hear that! had a few bikes stolen before and have been lucky enough to get them back a few days later with not to much damage apart from ignition barrel where they where hot wired! .I'll keep my fingures crossed you get it back
thanks i did see it while i was in the car so we tried chasing him down but he took a turning and we lost him missus doesnt understand co-driver instructions lolQuote:
Originally Posted by Biker1234
Hey did you ever get your bike back ?.My big bore kit arrived today couldnt get over how quick it was to get here everything was well packaged ..currently making plans to install within the next week or two ,the numbers with be getting grinded of the side of the cylinder over the weekend and will be getting blasted with the heat resistant paint trying to decided if im going red or black on the paint job
hi mate hows the bike going i got a new 2013 sinnis its lighter than the last bike i hadQuote:
Originally Posted by Biker1234
Hey,awesome news about getting the new bike! is it the 2013 sinnis apache 125 supermoto ?.My bikes going well have my 150 cc big bore kit here and will probably be installing it later this week just need to get some eproxy weld to fill the sai hole where ever that is located on the new cylinder so need to read up on that one and get the thing installed lol,hoping to get some more work done tonight after work on my bike im looking to finish the custom vinyl job off on the tank and back plastics and im spray painiting the rear grab handles as there scratched to bits so sanded them down and gave them a few coats of primer will do the colour coat tonight :clap: .Did you get your 150 cc big bore kit yet? should fit on your new bike if its the sinnis apache 125 sm
Attachment 13243 Also going to order a set of these levers for the bike which im hoping should fit and if they dont ill force them to.These levers are great have them on my Yamaha DT 125 there unbreakable ,the ones in this pic are fakes though and like £30 where as the DT ones cost £80
very nice yeah its 2013 sinnis apache 125 and boy its quicker than the last one if the levers fit let me nowQuote:
Originally Posted by Biker1234
first ride out https://www.youtube.com/watch?v=gytwmY6gQfI
Nice! So guessing your new bikes the orange colour sinnis apache 125 if I'm correct? I like the orange one looks like a KTM ..:scooter: