Printable View
I would like to get a paddock stand to use with the 650TR problem is that it leans too far over, very awkward to use my current stand on my own... So was thinking of getting a paddock stand that uses bobbins..
Does anyone know which make of bobbins would fit the rear so I can do the job of lifting the bike on my own?
I could be wrong but I think the bobbins are generally a universal part. I'm getting some too and a paddock stand over the winter for doing my own maintenance. I'll let you know how things go.
Thanks ZMC888... Look forward to your update.
Prince666 has a one or two extra side stand foot extenders (club foot) for sale. The race stand bobbins are pretty much a universal item, but can be made from a range of materials and colours. As for a actual race stand, there are also a multitude out there, but you'd best head to a m/c shop and have them measure one up to your bike e.g. take one out and try it. Sure the same race stand used for a Kwaka ER-6F or ER-6N might work. Just watch for the exhaust, since the bobbins mount real close the end of the standard exhaust.
The good thing about getting a side stand foot extender is that this makes the bikes lean angle less when parked on the side stand, and much easier to put onto the rear race stand if you are working alone. Of course a suitable block of wood works well too...
Not for sale now PM ZMC888 he can get them made for 40RMB /£4
Attachment 14547
Attachment 14548
Attachment 14549
Attachment 14550
Attachment 14551
Hi 650TR
Here are some pictures of my padock stand, i got a front and back , but even with the new side stand i made its still a little hard to get the back up by your self but the more you do it the easier it gets lol
Attachment 14552
Attachment 14553
Attachment 14554
Here is the link to Taobao from people in China
http://item.taobao.com/item.htm?id=1....1.18.8.ao9fee
Hi 650TR
Did you read Bikerdoc post about clutch cable both mine and his went at about 5000km so keep a eye on it , you could be lucky and have the same one "export model" as Buck & Amy which has done 25k km now and looks fine but just the heads up on it . Both mine and Bikerdoc are the 2012 models.
http://www.mychinamoto.com/forums/sh...5119#post65119
Please put advertise products in the classified section. Then link them to other threads otherwise the thread goes too far off topic.Quote:
Originally Posted by prince666
Thanks for your co-operation!
Hi prince666Quote:
Originally Posted by prince666
Thanks for the heads up, did read the thread, will monitor mine also ask the garage to check at 4K mile service (garage service needed to comply with 2 year warranty)..
BTW I have had a problem with one of the pannier catches.. Where it springs open as soon as the key is turned... The garage has looked at it and ordered a replacement under warranty.. But, during the inspection they carried out the put a deep V shaped scratch around 2inches long in the pannier. I made them aware of this. They have all ordered a replacement cover that they will Reece at the same time as linkages etc..
I contacted WK Bikes who are the importers and distributors here in UK to ask about top box. They told me that there in one coming... I suspect it may be revealed at the NEC motorcycle Live show in Birmingham, UK later this month
Hi prince666Quote:
Originally Posted by prince666
Found this at ghostbikes.com could do the job?
Attachment 14555Attachment 14556Attachment 14557
Quote:
Originally Posted by 650TR Rider
That should work ok .