Qingqi QM200GY (Qlink XF200) Raising handlebar height

Someone once observed here that the Qingqi QM200GY models came with handlebars that were a little too low for comfortable standing up on the pegs.
I also felt this before, but thought I must be a funny shape or deformed or something...The standard bars also place a lot of your body weight over the handlebars and give you a hunched up riding position. On top of that you feel that braking while standing on the pegs would throw you over the bars.

I did look for alternative bars in a lazy sort of way, as I wasn't prepared for all the dismantling, possibly make-up or re-route wiring and control cables, etc.

I found the answer in this ingenious set of billet CNC machined alloy handlebar risers made to fit the Suzuki DR200, DR350, DR650, DRZ400 (A), but they fit the Qingqi like a glove. Fitting takes 10 minutes with no alterations whatsoever to any of the control gear:

http://i5.ebayimg.com/04/i/04/7d/e0/de_1_b.JPG

They are on ebay at the moment for 36.95 + 4.95 shipping:

http://cgi.ebay.com/ebaymotors/1-Han...ayphotohosting

This is what they look like on my bike. I had to temporarily remove the plastic handlebar crossbar protector for easier access to the bolts. New, longer bolts come with the risers. Torque these to 25 Nm (18 ft/lbs). The bike feels a lot better now:

http://www.telecable.es/personales/a...gqi/risers.JPG

Forchetto,

Glad you got it sorted! The higher bars made the 200 GY in China much better in the comfort and handling departments when both sitting and standing. Overall, bar risers are one of the better, easier and cheaper mods you can do to these bikes.

CC

Good find forchetto. Right now I'm looking for options like these so that I see behind me. I was thinking about these risers or bar end mirrors. Now I am thinking I should go with both.

I've also junked the stock mirrors. I could only see my elbows. Replaced them with some old-fashion British Stadium bar-end mirrors. I haven't tried them with the risers though. They might be usable now.

Here's a picture of my bike where several mods can be seen:

Bar-end mirror. Entirely made from stainless steel and available at:http://www.classicpartsltd.com/class...clemirrors.htm
CBF250 Honda front mudguard. Didn't like the Mad Max original. Got a used one from a breaker. New one costs over $200...that's Jap spares for you.
Lowered seat by slicing 2 and 1/2" of foam from the padding. Hard on the arse though...
Chain tensioner. Deliriously happy with this.
Power take off socket on left side panel. This can also be used to charge the battery without any dismantling.

http://www.telecable.es/personales/a...i/leftside.jpg

This is the classic "Stadium" mirror. Note the proud engraved "Made in England" on it. When was the last time we saw this?. Top quality by the way. Beware of imitations, cheaper ones have flat glass and a limited field of view. This one has the correct convex glass and works great. Check this before buying any mirror. Those with flat glass are useless.

http://www.classicpartsltd.com/images/820mirrorl.jpg

Hey forchetto, please give me your thoughts on these;

http://cgi.ebay.com/ebaymotors/Bar-E...Q5fAccessories

or

http://cgi.ebay.com/ebaymotors/Bar-e...Q5fAccessories

or

http://cgi.ebay.com/ebaymotors/NORTO...Q5fAccessories


All say with curved glass and I really want to stay with black ones.

They're exactly the same, aren't they?. Except the third place is a lot cheaper.

They look to be well made if a little small. They're only 3 inches, but as they have the all-important convex glass they'll give a reasonable view but I would prefer something a bit larger if you do a lot of inner city riding. On the plus side they won't stick out as much as mine. That's why I only got one on. A pair would make the bike too wide.

Yeah, they are pretty much the same...except for price. Quite a bit of difference. Per your recommondation, I went with a little larger set as I will be doing most of my driving in the city. It's been pretty scary so far looking into the stock mirrors and seeing only my arms. I try to stay in the right lane (USA) so that I can at least see what is beside me. I can no way see what is behind me right now so I'm looking forward to getting the new set on.

still a work in progress..

http://i250.photobucket.com/albums/g...d/IMG_0308.jpg

still have to refine the edges and look for a more suitable bolt...

Nutmeg it looks like you did what I've been thinking; make your own out of aluminum bar. I'm guessing that you went 1 1/2" rather than the 1" forchetto did.

it's actually 2" :icon10:

Quote:

---

Originally Posted by david3921

Nutmeg it looks like you did what I've been thinking; make your own out of aluminum bar. I'm guessing that you went 1 1/2" rather than the 1" forchetto did.

---

Well, I bought the set of risers that forchetto recommended and am very pleased. Shipping was super fast, 3 days in the states, and easy installation. Very high quality and packaging. I didn't need to remove the bar pad though. I found that when I lossened the original bolts at the gas tank, the gauge side ones where just snug. When I installed the riser and new bolts I snugged up the gauge side first with the bars rotated enough to access the bolts. Then I rotated the bars to the desired position and tightened the gas tank side bolts.

I also had installed Napoleon style bar end mirrors. They are very similar to the ones forchetto has but with a nut that expands a rubber bushing to tighten them to the bar. This reduces vibration a HUGE amount. The right mirror has no vibration with the left one only a little. I'm going to work to see if I can illiminate it there also. Here's the ones I bought;

http://cgi.ebay.com/ebaymotors/NEW-H...4506.m20.l1116

A little bit more expensive but well worth it for the peace of mind.

There are plenty of 7/8" handle bar risers on Ebay. Do a search. I have these at
http://www.formtechservices.com/dirt...om/RISERS.html
but I don't know if they are the best. They are just risers.

i have a brand NEW set I just ordered on ebay still in the package - Paid $35 will sell for $25 shipped they are 7/8" risers. Here is the link to what they look like:

http://cgi.ebay.com/ebaymotors/ws/eB...=STRK:MEWNX:IT

E-Mail me directly at sales@jamestowncomputer.com I do PayPal or CC over the Phone. PM me ASAP If intrested. 1st come first serve. My Loss is your Gain.

Andrew