Printable View
hi, i have a pulse adrenaline and the dash light for indicators doesnt work has anyone had this problem and knows how to fix it, it isnt the bulb as the bulb works and has been switched round with the full beam dash light there is a orange with white stripe wire with connector underneath the seat loose but i cant seem to find where it connects too? i think this might be the problem its the only loose wire and everything else works 100% fine
have you followed the wires down to the wiring loom? maybe a break further down ?Quote:
Originally Posted by Dan SM
yes i followed from the front indicators right threw the whole loom to the back indicators and theres no wires loose apart from an orange with white stripe one with a bullet crimp on the end and i cant seem to find where it goes :/ lolQuote:
Originally Posted by supersmooth315
if you can try and take a photo of itQuote:
Originally Posted by Dan SM
yes no problem i am waiting on post coming with parts for the bike so when they arrive il take it apart and take a pic of itQuote:
Originally Posted by supersmooth315
no problem i will help out if i can i have owned a pulse and a sinnis both practically the same both got modded to the teethQuote:
Originally Posted by Dan SM
Thats the best pic i could get if you can see that orange, white stripe wire with bullet crimp its the only wire loose and i cant seem to find where it goes lol Attachment 17105
Look to see if there's a Y joint to push it into.? The green wire and blue wire possibly a double joint bullet place
There is no Y joint but is this wire supposed to have it? I could buy one if it is.Quote:
Originally Posted by NZBrakelathes
Attachment 17172
Can 2 wires go on one end there? Sometimes there's 2 wires side by side and one at the opposite end
Im not sure i'll have a look tomorrow and let you know but ive looked a few times and cant seem to find where the wire goes and everything else works apart from indicator dash light and this is the only loose wire so im assuming thats why there not working
Possibly an earth wire so it possibly joints to an earth connector
If its an earth wire and i touched it to the frame would the dash light work?
Should do but use a fuse to check I case you give it a short!
Or use volt meter test the two wires at the bulbs for continuity to what side of + or -
Il give it ago tomorrow hopefully it works its the only thing i need for mot and hopefully dont have to take bike to repair shop for something so stupid lol