Qingqi Sport 125 piston hi valves(and what a mess)

Yesterday, i was driving on highway( about 30km trip), as i started to go out higway, sudently when i downshift to 3rd from 4 gear, Bike start to responding, luckly i was at end of highway.
I Heard one klicking noise coming from engine, i just let the bike go in neutral, until it was to stop. Call assistence and tow truck took bike to my garage.
Today i was in a hurry to see whats going on.
And What i found.... :(

Attachment 17110
Attachment 17111
Attachment 17112

I dont know why it happened, but i could guess...I pushed engine a bit, i assume.

I'm now woundering how i wil solve it.
I have technical and pratice, since i'm studying to be motorcycle mechanical. Last month i have opened more than 10 engines. LOL (So at least i wil not pay to someone repair)
Now i have do figure it out what its the cheapest way to solve it since im jobless at moment.

Far as i know, i need(need to open all engine to confirm ):
Head(that one has no repair)
Valves
Piston/rings
Cylinder(since wil change piston, better do to) But mine looking good.

This week i wil confirm if gear box was not affected buy piston pieces, or valves remains.


So i'm open to sugestions, starting from rebuild, or just engine swaping(like Gn250 swap)

Quote:

---

Originally Posted by etiko87

... engine swaping(like Gn250 swap)...

---

250 mod http://www.mychinamoto.com/forums/showthread.php?3377

Hey Etiko, did you manage to "close" any of 10 bikes you "opened" recently? :icon10:

If you ask me, if everything else is OK, cheapest solution will be new piston set and head assembly. If cylinder is damaged, you can bore it out to fit overhaul piston, half a millimeter or a millimeter larger in diameter.

Humanbeing can certainly give you good advice on the choice of a suitable pistons and head assemblies.

Quote:

---

Originally Posted by humanbeing

250 mod http://www.mychinamoto.com/forums/showthread.php?3377

---

One guy on portuguese forum have done this on this bike, witthout modifeing anything on frame.
I guess its almost easy as "change" engine, but i have my doubts ..

Quote:

---

Originally Posted by Zorge

Hey Etiko, did you manage to "close" any of 10 bikes you "opened" recently? :icon10:

If you ask me, if everything else is OK, cheapest solution will be new piston set and head assembly. If cylinder is damaged, you can bore it out to fit overhaul piston, half a millimeter or a millimeter larger in diameter.

Humanbeing can certainly give you good advice on the choice of a suitable pistons and head assemblies.

---

Yes i mean, disassembly them engine then assembly :) Last disassembly/assembly engine to pratice was CBR 1000RR '08

1rst I have to confirm if there isnt anything else damaged :(
But wil not do today.
Lets keep in touch

Today i drained all oil, from block, and i have bad bad news, alot piston filings, i could imagine, when i open to clean i wil found more..

Similar http://item.taobao.com/item.htm?id=38907301024 | http://item.taobao.com/item.htm?id=20293153038 (Suzi "whole" head |10mm spark plug /smaller valves /for flat piston) thingy from nearby breaker maybe the prefect answer .

Do you think that links you give-me are in good condition? thanks humanbeing.

Quote:

---

Originally Posted by etiko87

Do you think that links you give-me are in good condition? thanks humanbeing.

---

Shop it in ur local breaker as possible...
Those seller above are from a town http://www.motorfans.com.cn/bbs/view...p?tid=17658840 that specialize in this trade. Most of their goods are bid from police http://www.motorfans.com.cn/bbs/view...p?tid=17810595. Most impound yard's (unregistered ...) bike is in good condition BUT if it's from a govt fleet http://www.motorfans.com.cn/bbs/view...=434490&page=1 ...)

i wil try to find out if in portugal there is a good deal, on used parts... or motor.
Since i will pay too much shipping from china to here... :(
The only thing that worth buy on china+shipping, its bigbore kit, since here in portugal the prices are madness...It rounds about 300€ (Cylinder + piston). :O
And big bore kit that you recomend its about 30€ plus shipping, total about 70€ +-.
If there a way to pay less on shipping, i'd buy everything new from taobao... But agents cost too much... :(

Quote:

---

Originally Posted by etiko87

...If there a way to pay less on shipping, i'd buy everything new from taobao... But agents cost too much... :(

---

Find a agent that offer similar service as http://www.sfcservice.com/pages/inde...tle/uroexpress Ship to UK > rest of EU...

Isnt that web site bit complicated? I just take a pick look to site, and i dont understand nothing... LOL
Thanks for your patience :)

That company had English version http://www.sendfromchina.com/ . Many chinese ebay seller use them. The dimensions limit(s) just like those of Royal Mail .

Yes, their english verision is the above. But I use sendfromchina.