CFMoto 650NK/TR parts numbers and maintenance guide
Hi all, I'm looking for the parts numbers/types for the NK/TR.
1. Brake pads
2. Oil filter
3. Battery
4. Spark plugs
5. Tire size in both metric and imperial systems
6. Oil rating
7. Coolant type
8. Air filter type
.....and any other torque settings, oil change intervals, links etc. I think CFMoto information is best, but Kawasaki ER6 information is good when CFMoto unavailable/incomplete.
2 Attachment(s)
Re: CFMoto 650NK/TR parts numbers and maintenance guide
Attachment 13627
Attachment 13628
ER6N bolt checking guide, anyone got any torque values?
Re: CFMoto 650NK/TR parts numbers and maintenance guide
Quote:
Originally Posted by
ZMC888
Hi all, I'm looking for the parts numbers/types for the NK/TR.
Quote:
Originally Posted by
ZMC888
1. Brake pads
LHS Front: A000-0801A0
RHS Front: A000-0801B0
Rear: A000-080280
Quote:
Originally Posted by
ZMC888
2. Oil filter
Oil filter: 0700-0700200
Quote:
Originally Posted by
ZMC888
3. Battery
Battery: 12V10Ah
Quote:
Originally Posted by
ZMC888
4. Spark plugs
Spark plug: CR81I
Plug Gap: 0.7~0.9mm
Tightening Torque: 15N.m
Quote:
Originally Posted by
ZMC888
5. Tire size in both metric and imperial systems
Front: 120/ 70 R17 (58H) Up to 236kg; 280kPa, minimum tread depth 0.8~1mm.
Rear: 160/ 60 R17 (69H) Up to 325kg; 280kPa [(?!) weird front and rear same tyre pressures!?] minimum tread depth 0.8~1mm.
Quote:
Originally Posted by
ZMC888
6. Oil rating
SAE 15W-40/SG
Viscosity: ELF 10W-40
Type: JASOMA2 SJ
Quote:
Originally Posted by
ZMC888
7. Coolant type
Coolant: Check the coolant level daily. Change the coolant every 2 years. Coolant containing corrosion and rust inhibitor chemicals should be used only.
Quote:
Originally Posted by
ZMC888
.....and any other torque settings, oil change intervals etc.
Fuel: RON-93 Use only unleaded gasoline. Never use leaded gasoline. Leaded gasoline signifcantly reduces the capability of the catalytic converter.
Drive chain: Slack 30~40mm
Throttle grip play: 2~3mm
Clutch lever play: 2~3mm
Engine oil Drain Plug: 30N.m
Oil flter: 17.2N.m
Idle Speed: 1300±130 rpm
Rear axle nut: Tightening Torque: 108N.m
Brake Pedal Travel: 10mm
Rear suspension adjustment: The standard setting position for an average-build rider of 75 kg (165lb) with no passenger and no accessories is setting No.3.
The maximum recommended load on addition to vehicle weight is 180kg (397lb), including rider passenger, baggage and accessories.
1 Attachment(s)
Re: CFMoto 650NK/TR parts numbers and maintenance guide
1 Attachment(s)
Re: CFMoto 650NK/TR parts numbers and maintenance guide
1 Attachment(s)
Re: CFMoto 650NK/TR parts numbers and maintenance guide
1 Attachment(s)
Re: CFMoto 650NK/TR parts numbers and maintenance guide
1 Attachment(s)
Re: CFMoto 650NK/TR parts numbers and maintenance guide
Re: CFMoto 650NK/TR parts numbers and maintenance guide
Thanks Bikerdoc, great information
Engine Oil Capacity
2.0 L [When filter is not removed]
2.2 L [When filter is removed]
2.6 L [When engine is completely dry]
Quote:
Originally Posted by bikerdoc
Battery: 12V10Ah
But what size battery? I got a wet battery with the bike, I'm not sure about anyone else but I'd like to switch to a dry Yuasa, what dimensions/code number do I need?
Re: CFMoto 650NK/TR parts numbers and maintenance guide
Quote:
Originally Posted by bikerdoc
Brakes LHS Front: A000-0801A0
RHS Front: A000-0801B0
Rear: A000-080280
These codes bring me to a dead end. Do you have any different codes or any links to where I can buy replacements?
Same happens with oil filter type. Seems not be an actual code number just an internal CFMoto code of some kind. Also need air filter codes.