found an interesting cdi

hi folks,
i found an interesting programable cdi on the web.. bus digit progcdi: it a black box with orange lettera and a couple 2led digit..
could be programed in many aspect without a pc.. but to set the advance needs an info.. someone knows this value : “In "Pu" introduces a physical position of the crankshaft position sensor.
This is the angle between the pulse from the sensor and the upper position of the piston. This is normally from 20 to 30 degrees.” ?????

Engine is a 169fmm

Quote:

---

Originally Posted by tigerjacopo

hi folks,
i found an interesting programable cdi on the web.. bus digit progcdi: it a black box with orange lettera and a couple 2led digit..
could be programed in many aspect without a pc.. but to set the advance needs an info.. someone knows this value : “In "Pu" introduces a physical position of the crankshaft position sensor.
This is the angle between the pulse from the sensor and the upper position of the piston. This is normally from 20 to 30 degrees.” ?????

Engine is a 169fmm

---

Hi welcome to MCM
If you add some photos or screenshots +/- links to what you are referring to, may assist
:mwink:

Quote:

---

Originally Posted by bikerdoc

Hi welcome to MCM
If you add some photos or screenshots +/- links to what you are referring to, may assist
:mwink:

---

where there is the ebay link
https://www.ebay.co.uk/itm/133516010...mis&media=COPY