Re: New CFMoto 650NK blog x2
Wooooohooooooo! So you gonna push the Raptor off a cliff now?
Re: New CFMoto 650NK blog x2
Quote:
Originally Posted by euphonius
So you gonna push the Raptor off a cliff now?
No way! I spent four years getting that bike up to the level of a neglected 1982 Honda CB250N. :icon10: In fact it's worked very reliably for about the last two years other than cheap component failure.
Re: New CFMoto 650NK blog x2
Well done
Good news about time you moved up a size 34.500 for the bike what about the cost to plate bike . break in drive slow 0-800km 4000 max revs 800-1500 km 6000 max change oil at 500 km and again at 1500km sounds good check the water pump to see if you have a leak and how is 2nd to 3rd gears going up ???
just got the TR Trade for 39.800 in red will do a report soon is your side stand the same as the TR to short ???
Re: New CFMoto 650NK blog x2
Congrats ZMC, enjoy every minute of it.
Cheers!
ChinaV
Re: New CFMoto 650NK blog x2
Quote:
Originally Posted by
prince666
Well done
Good news about time you moved up a size 34.500 for the bike what about the cost to plate bike . break in drive slow 0-800km 4000 max revs 800-1500 km 6000 max change oil at 500 km and again at 1500km sounds good check the water pump to see if you have a leak and how is 2nd to 3rd gears going up ???
just got the TR Trade for 39.800 in red will do a report soon is your side stand the same as the TR to short ???
480RMB or so for plate including insurance. The short kick stand would ideally be maybe 2-4cm longer, but not really terrible, maybe TR sits higher? Was going to do break-in something similar to what you said, but thanks for that.
Quote:
Originally Posted by guangtouge
basically following the manual,
Anyone got a link to a .pdf English or Chinese, NK or ER6?
Quote:
Originally Posted by guangtouge
Forgot to mention, tighten the tubing going into the radiator. I have heard it has a tendency to work itself loose, and I have had one instance where that had been the case on mine. I have since tightened everything down and not seen another issue.
Already have some hose clips!
Quote:
Originally Posted by V
Congrats ZMC, enjoy every minute of it.
I was getting so bored of small displacement bikes I nearly gave up on riding. This should reignite some passion.
Re: New CFMoto 650NK blog x2
Congrats, post some pics of the bike when you time.
Re: New CFMoto 650NK blog x2
Quote:
Anyone got a link to a .pdf English or Chinese, NK or ER6?
Have a PDF in English owners manual for the NK if that helps so pm your email address and i will send but i need the same for the TR who can help ??