Qingqi tech questions submisssion....
We have more than a couple questions now about technical details of QingQi's 200cc motard. I'd like to ask the factory to provide some of this information but it's better and easier to do it all at once rather than one-at-a-time.
I want to stress that nothing is guaranteed but we will give it our best shot.
Please post any TECHNICAL ONLY questions that you'd like to ask QINGQI here and we'll see if we can get some answers.
So far we have:
- Correct valve spacing
- Amount of fork oil in the USD forks....
Anything else?
CC
QingQi response update...
- QingQi has just finished their 125GY work-shop manual in Chinese and has not yet been translated. The 200cc version (which should be relatively similar) is up next but a completion date is not known.
- Official QingQi 200GY valve clearance specs here:
http://www.mychinamoto.com/forums/sh...=2709#post2709
- Still not sure about the fork oil.
Hope this helps!
CC
Rear shock air pressure and fork oil answer...
Just got some info from the factory folks...
Fork oil amount answer is here...
http://www.mychinamoto.com/forums/showthread.php?t=345
Regarding the air pressure in the rear shock...
- From the factory they are loaded with pressure which is .6Mpa.
- Standard pressure is .6Mpa+/- 10%.
No information on the max pressure allowable as that will probably vary by riding style and weight so play around with it, but at least now you have a base-line to start from!
:riding:
CC