Re: loose engine need help
Most "167FMM" are air-cooled CG250. Does it look like http://item.taobao.com/item.htm?id=19602800553 ?
Re: loose engine need help
Quote:
Originally Posted by
humanbeing
Yes with the exception that it doesnt have any branding stamped on the transmission cover, and the plugs have been cut from the neutral and reverse light wires.
Re: loose engine need help
So what CDI do I need to purchase, and do I even need the rectifier? Or what chinese brands ATVs would this be in so i can buy a harness to make this work.
I'm not sure if i am posting my thread in the right section either, sorry if I'm not.
Re: loose engine need help
Re: loose engine need help
I don't had x-ray vision , so just talking the basics
---
http://www.dansmc.com/electricaltesting.htm
AC-CDI: Most "std" CG family
DC-CDI: Old bike's Source (aka :exciter) coil F***ed or non exist (ALL coil winding are for REC's dc 12v)
---
AC-CDI:
http://www.sanxin.com.cn/exhibit/upl...8521841627.jpg
DC-CDI:
http://www.sanxin.com.cn/exhibit/upl...1305739717.jpg
S/W is for +12v http://chinariders.net/showthread.php?t=13937
---
Connector is either rectangular ("std" learned from Taiwan) http://www.sanxin.com.cn/exhibit/upl...8522499844.jpg or round (Honda) http://www.sanxin.com.cn/exhibit/upl...5371625487.jpg
---
REC is need for DC 12v … 2 OR 3 wire (In most case are yellow. Sometimes are White or Pink… ) from stator uses different kind...
---
Most vertical chonda are wired like http://do.ejdz.cn:8087/%E6%91%A9%E6%...F%E5%9B%BE.gif
Quad just added some safety S/W from here & there.
3 Attachment(s)
Re: loose engine need help
Thanks for the help. Here are some pictures I just took of the engine.
Attachment 16722
Attachment 16723Attachment 16723
And this is what is going into. Its still a work in progress.
Attachment 16724
Re: loose engine need help
Hello,
I also bought a 167FMM with troubles inside but complete electric system.
Beside of that, electric system is a CG like one with AC ignition system. I have wiring diagram somewhere if you still need;
What about cooling in you system ? Those engines are made for hard work but need cooling.
regards.
fred