Lexmoto XTR 125

Hi All,

I am complete newbie and just brought a really nice Lexmoto XTR 125 (12 plate)

However, I need a bit of help and guidance if possible please

I have already brought the Haynes manual (awaiting delivery) but my clutch lever is really loose and causing issues whilst changing gears up and down.

Also i would like to change the oil but I am not sure where the oil chamber is to replace the drained oil

Sorry these are really basic questions but I want to learn and do the job correctly

Thanks in advance

Oh man, you are stuck with non-English speaker. And he is almost out with English word for today. :icon10:

Clutch cable must to be tight enough - lever must to have half centimeter slack. Basically, you must to extend cable housing (there are some thread at lever's side and somewhere in half of a cable housing) to get that slack.

Oil drain is somewhere on the bottom side, and he is directed downwards.

If you can not find oil cap with marking 710 (look like this - http://a2c2.us/wp-content/uploads/2012/07/oil-cap.jpg ), he is somewhere up on the right side of the crankcase cover and it is directed upwards.

And where is your bike's owner's manual?

Hi,

Thank you

Your english is very good and i am grateful for the advice

I have already ordered my bike manual which should be delivered next week. Just slightly worried about my clutch cable