Removing Front Wheel - Pulse Adrenaline

Hi All,

I was wondering if anyone knows the name of the tool I need to remove the front wheel from my pulse adrenaline as I am needing to replace the speed drive. Its not the normal nut & bolt type on the spindle, it looks like a big Hex Key or Torx. Its kinda like a Negative Nut. I have the Haynes manual, but it only has nuts & bolts on the pic in the book.:eek2:

Any help greatly appreciated.

Mike

EDIT : I think it might be something like this I need, can anyone confirm? I think its 14mm according to my ruler

http://www.getgeared.co.uk/core/medi...cdda80c3f423a1

Yep, you need a 14mm allen head wrench. You'll need a smaller one to loosen the pinch bolt also. Do not over tighten the pinch bolt when re-installing, however. The bottom of the fork it cast aluminum and overtightening can crack it.

Check out this post as to what happened to McKonker when the dealer overtighted the pich bolt.
http://www.chinariders.net/modules.p...ghlight=konker

A 14mm headed bolt with a couple of nuts locked on it inserted in the axle shaft will work. I put one in my tool kit on the bike.

Thanks for your Reply's everyone.