CFmoto 650 MT center stand.

Here are some pictures and fitting manual for an After Market centre stand for a CFmoto 650 MT.

Here is my Review?

When you consider the engineering problems involved in designing and manufacturing an aftermarket centre stand to fit a motorbike which has no built in locating points.

The Company has done a good job with the design.

The Center stand picks up with 3 main support points on each side which make the stand very strong.
For what I can see you lose no ground clearance with the centre stand fitted.


https://s19.postimg.cc/ppryfcioz/ss3.jpg



https://s19.postimg.cc/gr1w21qkz/ss7.jpg


https://s19.postimg.cc/67xaz6gjn/ss2.jpg


https://s19.postimg.cc/ec5f49ihv/ss1.jpg



https://s19.postimg.cc/txmqo4ezn/image.jpg

One of the hardest parts was to locate the return spring?

I needed to make a tool for this job.



https://s19.postimg.cc/j0lez0ker/ss5.jpg



https://s19.postimg.cc/hgkoee3z7/ss6.jpg



The below link is for the fitting manual with some great pictures and easy instructions if you can read Chinese

How can I buy one? I am in Argentina.
Regards

Just spoken to the company who makes the center stand for the MT.
And here is the link to there Aliexpress account.
But each new item Which is posted on Aliexpress needs to be approved, so therefore the center stands are not listted but will be in about 5 days time.

Link.....This is our link to our aliexpress store https://www.aliexpress.com/item/Wind...ceBeautifyAB=0

For some strange reason I can't read the last post.