Search:

Hmmm... Is it possible to fit a Sinnis max II 4 bolt rear sprocket CARRIER with a matching rear sprocket on my sinnis stealth?

I found a max II sprocket with a maxII carrier for sale. Iám just not...

It would be the best if I can change the front sprocket to a 1 or 2 teeth more one, and the rear to an 1 or 2 teeth lesser one, as I am missing top speed very much.

I just don't know to what parts...

Greetings, I need to change my sprockets+chain,

managed to find a
-428 chain for the Sinnis stealth,
-aswell as a front sprocket, (I try a 16 teeth this time, maybe it puts a little plus speed...

I don't know how to check the valve gap, and any other settings of the carb yet :(

I'm going to count the teeth in the coming days! :)

Well, theres a lot of time passed, I was riding my Superbyke RSR to work, and such, here's the results:

in gear 5, 50-55mph is the max,
but in gear 4 I can squeeze out 55-62mph.

This max...

-moved it to new topic-

That's the CDI there on the picture?
I have a new pickup fitted since 3 days, and a new CDI is coming via mail-

So I presume if I fit the CDI and still no rev count, then either the wire loom,...

Since I was this succesful in changing the stator/pick up coil, I start to look into the digital tachometer's problem again.

Needle stays at 0 since I got the bike, sometimes jumps a little, but I...

Ah, forget it- found, after very careful inspection, that altough the white cubic plastic connectorhead of the new stator unit seemed securely connected, inside of it it was faulty.

Wasn't...

Hi, bike went dead ^^ after succesfully installed and tested the regulator and stator. It was started ok, test went good, but the next morning it was dead.

Starter spins the engine good, no...

Something is not ok. Around midnight I tested the engine, started right away, idling good, that was when I measured the 14.50V, then switched off and it went down slowly to 12.80. But: today I tried...

I don't have that :(

So, is the 14.50v while engine running is any good? Is it going to be ok?

I am not overly convinced. This is a new battery, 3-4 months old, Yuasa, fitting specs, filled with it's own electrolyte. Then I had an accident, electrolyte spilled and I didn't recognised that the...

Sooo, constant 14.50 or slightly bigger while engine is running is too weak compared to the 12.80 of the battery base?
So this is not enough? O_o

Er... I read it just now :D and already drained the oil, took apart the left crankase, installed new stator, closed it, and refilled witth new oil....


Threadlock? THAT explains why it was soooo...

Hi, I connected my multimeter in 20V range to the battery terminals, when athe bike was idling, it read around 12-13v. But no matter that I opened the throttle, and revved it higher and higher, the...

Hi!

My problem is, that if I charge my 3 month old battery via a lextek battery charger/regulator, overnight it works like a charm in the bike, but as soon as I leave the bike standing for one day...

Hi, long time no see- had some problems with the network.

So, I checked, and cleaned the air filter, actually it barely had any dust in it.

What can be the other cause of the weak 5th gear?...

I dont want to be sounding as someone who wants to race a 125 :D
I just don't want to be dangerously slow on a 70 max dual carriageway. (With CBT I can't go to motorways, but dual carriageways...

But as far as I know this bike should easily do 70 mph-especially that it lies about it's speed :D so it should do at least 65 in reality and 70 in his speedo. Seen videos where guys do 75-80- Next...

I have that mikuni carb one thats the same for rmr - I will find out the number of sprocket
teeth, and let you know!

Thats the next thing! :) Im going to do that, as luckily the bike is back at my garage finally...

The mechanic cleared the fuel ways, and carb after the fall- so the bike was started normally.
...

Well, the first nanual is for my old caeb- seems rhorough enough, but i still dont know what do we need to fit the new one. If we need different hoses, for example rhe huge one comes from the air...

SO I can't fit on the one I ordered?

Because all sites state that that carb I linked is for my bike- thats why I try to make sure what I need to fit it

CUrrently I have the one for the RMR MJH...

Yes, I currently have the RMR one, which I do not understand, as all of the net says the other one...


Can my mechanic fit the new one? ANd if yes, what do we need for that? WHat are the...