Adventure Motorcycle Magazine Subscribe Now

Search:

Type: Posts; User: spencer2004

Page 1 of 17 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    7
    Views
    2,546

    Re: Weird problem with Lexmoto XTRS

    If it's of interest to anyone, it turns out the fuel tap was faulty and causing an intake air leak via the vacuum tube.
  2. Replies
    7
    Views
    2,546

    Re: Weird problem with Lexmoto XTRS

    Well I completely drained the contaminated fuel and it seems a bit better but I think there's more to it.

    The problem is somewhat intermittent; sometimes it will idle more or less fine and will...
  3. Replies
    7
    Views
    2,546

    Re: Weird problem with Lexmoto XTRS

    I was reading conflicting information on what they should actually be, thanks for letting me know.
  4. Replies
    7
    Views
    2,546

    Re: Weird problem with Lexmoto XTRS

    Yeah it turned out to be water in the fuel tank lol
  5. Replies
    7
    Views
    2,546

    Re: Weird problem with Lexmoto XTRS

    Nice to see that you're still active :)

    I forgot to mention that I've already set the valve clearances to 0.08mm on the inlet and 0.15mm on the outlet though I will double check those.

    I just...
  6. Replies
    7
    Views
    2,546

    Weird problem with Lexmoto XTRS

    Hi.

    I've been trying to get the boyfriend's XTRS working and I'm running in to a weird issue. Basically it wasn't starting which I narrowed down to a compression issue; I replaced the piston rings...
  7. Replies
    5
    Views
    2,437

    Re: derestricting lexmto street

    I have a Sinnis Max which is near identical to your Lexmoto Street and my stock exhaust does not have a catalytic converter in it so I would assume that you don't have one either.

    These bikes are...
  8. Replies
    12
    Views
    15,183

    Re: Sinnis Blade 2014 - Help please

    Larger carb was about 25 for me, you want to widen the intake boot with a metal file as well. I can do 10k RPM with it whereas I was capped at about 8k before so I guess it works. The camshaft would...
  9. Replies
    12
    Views
    15,183

    Re: Sinnis Blade 2014 - Help please

    This is the one I bought for the same purpose, works well....
  10. Replies
    12
    Views
    15,183

    Re: Sinnis Blade 2014 - Help please

    Hi.

    If you can source them locally then they would probably be cheaper. After the agent's fee and international postage Taobao can be quite unexpectedly expensive.

    I'm not 100% sure but I think...
  11. Replies
    12
    Views
    15,183

    Re: Sinnis Blade 2014 - Help please

    I know this is kind of a late reply but if it helps...

    I have the big bore kit fitted to my Sinnis Max and it hasn't exploded as of yet. I have done about 20,000 KM since installing it and I...
  12. Replies
    3
    Views
    2,371

    Re: superbyke rmr remote start help

    You can cut the 2 wires that go to the clutch switch and either short them together or leave them disconnected depending on how the circuit works (try both ways and see which one works). This would...
  13. Re: 150CC BORE KIT, SINNIS APACHE 125CC, NEED HELP ?!?!

    There should be a beveled edge on the piston rings, this faces up.

    The loss of compression should be negligible. You could use a bit more torque on the cylinder head nuts to compensate a bit, the...
  14. Replies
    7
    Views
    6,985

    Re: Need help. about molkt 26mm carb.

    The particular 28mm one I have is shit because it's impossible to set the correct idle mixture without the RPMs going crazy, the idle circuit seems to get blocked really easily, there aren't any idle...
  15. Replies
    7
    Views
    6,985

    Re: Need help. about molkt 26mm carb.

    Ah I see.

    That carb is different to the one I have but it is the one I want to switch to as my current 28mm one is shit.

    I think that electrical problems with Chinese bikes are fairly common. I...
  16. Replies
    2
    Views
    7,364

    Re: Performance cdi Sinnis Stealth

    This is the one I have.

    http://item.taobao.com/item.htm?id=9153886492

    Order using taobaonow.com

    16451
  17. Replies
    7
    Views
    6,985

    Re: Need help. about molkt 26mm carb.

    Well the problem with these larger carbs is that they are designed to be used with larger bore engines so a small adjustment makes a big difference, this is even worse if you have not fitted a big...
  18. Replies
    2
    Views
    1,993

    Re: Lexmoto xtrs 2013

    The idle screw is generally on the right hand side of the carb.

    I think there is just one largish bolt on the bottom of the engine to drain the oil.

    I highly recommend that you buy the Haynes...
  19. Thread: HID help

    by spencer2004
    Replies
    3
    Views
    2,070

    Re: HID help

    Yes they do need to be grounded.
  20. Thread: HID help

    by spencer2004
    Replies
    3
    Views
    2,070

    Re: HID help

    It's highly unlikely that you will find the correct adapter for your bike, you will need to remove the old headlight connector and solder in the new connections.

    Find out which wire is for high...
  21. Replies
    7
    Views
    3,992

    Re: Spongy front brake

    Perhaps it would help if you fitted a steel braided brake hose, it might not completely fix the problem but it should help.

    Failing that you could try rebuilding the brake calliper, you will be...
  22. Replies
    3
    Views
    2,036

    Re: what big bore kit to buy?!

    It's best to get it off eBay as you are protected by buyer protection, it will probably take 3-4 weeks to arrive as it is coming from China. This seller can also sell you the gaskets, piston rings,...
  23. Replies
    12
    Views
    12,842

    Re: Pulse adrenaline big bore help please

    It looks like it will fit but I think that you should order it from eBay instead since most people on this forum order their big bore kits from there without any problems, remember to ask for a flat...
  24. Replies
    30
    Views
    23,818

    Re: DRZ125/XF200 cams interchangeable??

    It looks like it should work. Keep in mind that this kind of mod has only been done by 1 or 2 people on this forum so the results aren't completely known, if you do this mod make sure that your...
  25. Replies
    1
    Views
    2,009

    Re: lexmoto problems

    Is this just a problem with it idling or will it cut out while riding? If it's just an idlling problem then prehaps the idle mixture and/or idle speed screws on your carb need adjusting. Failing that...
Results 1 to 25 of 408
Page 1 of 17 1 2 3 4