Search:

Finally installed your LED?

Sent from my GN8003 using Tapatalk

If you use the same spec as mine it shouldn't be a problem. My bike runs now for about 7k km trouble free with that setup.

Sent from my GN8003 using Tapatalk

@Symon: in case your weight is can. 100kg like mine :'-( .... the 500 might be the better option.
For offroad 300cc is enough and with the 500 you must have a sensitive throttle hand otherwise you...

Just as last comment:
The two machines are same. Only displacement is different which results in 7kg more for the 500. On he other hand I also know people that are happy with their 300cc 😁

Sent...

I advise take bit more money and get a 500cc. I can tell you after testing both I more than happy to have taken the 500.
I call it one of the best buys on all bike I ever bought!

Sent from my...

Will be reinforced.

Sent from my GN8003 using Tapatalk

Not build yet. All drawings and design solutions ready. I hope I can make it during October holiday.

Sent from my GN8003 using Tapatalk

Proposal for modified engine guard (You might order from me :naughty:)

Brand: ShuBen Design :icon10:
3mm AL sheet metal, laser cut, bent and weld, anodized surface

original SWM, ShuBen engine...

@moilami, I still think the less additional weight on a wheel the better. The weight is every time placed at a specific spot and not evenly distributed around the rim.

Sent from my GN8003 using...

thats unfortunately very true. There might be some hidden talents but its a jackpot if you find them.

E.g. My SWM dealer should put a set of Karoo3 Dualsport tires on me BRANDNEW! bike. It ends...

Yes, that is correct. But as the clamp is a solid rubber block with steel inlay bolt and is relatively heavy it is better to remove it instead of adding more weight for counter balancing. Increased...

In post #114 I described the vibration reduction by fender change. A slight vibration was still remaining. I could eliminate that now too by removing the tire clamp at the front which pressed the...

Yes we can buy this m in China, but the prices are quite different because of import taxes.
For my SWM RS500R I paid 74.900 RMB ( ca. 10k Euro) incl. all taxes and Beijing B license plate.
That is...

... got and adjusted the X2 fender for try out of vibration reduction.

The slight amplitudes coming purely from the Karoo3 are of course still there, but the crazy shaking from original SWM fender...

@prince: What tire is that on your CRF?

exactly, it works like a wing. big surface and air going underneath and is guided by the shape downwards.
When you compare CRF and SWM front fender you will see that the SWM fender is much wider and...

Yeah I checked the CRF fender already. The question is whether I get a real one on TaoBao/Tmall.
But the prices are not that high, so I give it a try.
When it works out to 145-150kmph its fine. The...

Today I took off the front fender and had a speedy run.
The problem of amplitudes and vibrations comes from the fender.
Without fender the Karoo3 tire has some uncritical vibrations only.
I try...

I am interested to see the Superdual in reality.
The review praise the bike quite much.
IMO the setup is is absolutely sufficient and give a good "all condition cross country" bike for China.
I...

The LED we bought is not cheap but high quality.
The light output is in my opinion worth the investment.
We had concern that the cooler strips would get too hot and burn the wire harness.
This is...

After conferencing with Barry I bought a set of Cree automotive LED lights and installed it today.
Easy plug and play, no cable changes. ...

I had a look at IMS fuel tanks for TE510(2010). Maybe that's a future option with 13L.
At first I plan a fix point on the luggage rack for the 5L bike jerry can.

Sent from my GN8003 using...

Tank volume is 7.2L.
Today's consumption on a mix of city roads, ring roads and expressway was 4.7L/100km

Sent from my GN8003 using Tapatalk

:riding: .... not more to say! I have already 2000km on it.

Its a big fun and tempts for show off when the traffic light switches green.
Just open the throttle and wheelie it to 3rd gear easily....

On my draft are still pins and lugs missing as the design is still not thought to end.

I do it one and do it right. That is a bit time consuming

Sent from my GN8003 using Tapatalk