Search:

The B has the same rear sprocket.

It is pollution control. A lot of us have just removed the whole assembly and made a plate to cover the outlet in the head and buy a cap for the port in the carb. I think it makes the engine sound a...

Here is another http://www.ebay.com/itm/New-Zongshen-Off-Road-Dirt-Bike-250cc-Engine-4-Stroke-/250654515200

You might try this place out http://www.chinesemotoparts.com/index.php?main_page=index&pType=CG-ENGINE-4-Stroke-200cc&zenid=4da272200be7b18b3d094246275aad57

The police have these machines they place next to the road that shows how fast you are going. It's right on for my car but shows 5 mph slower than indicated for the DF. Probably even worse at 60.

WOT on flat ground. Wouldn't want to keep her there for long as she's screaming.

Still lovin my DF

M

I wouldn't do a thing except regular maintenance. I have stock gearing and jets, changed the plug, fuel and air filter, added a crank breather, got rid of the air pump. Going on 500 mi and the...

After you change the sprocket or adjust the chain on the 2012 check the clearance of the rear fender and the tail light wiring from the tire, as the further you move the tire back the less clearance...

thanks axa

What did you use for shim stock?

This is the filter I got. http://www.bikebandit.com/bikemaster-universal-pod-air-filters Spendy but not as much as but similar to the K&N. I had to modify it a bit by grinding a groove around the...

Barnone , your brains seem fine to me, I aim to pick them as much as I can.

I read somewhere here that the motor power peaks at a lower rpm than 8000. Can't remember where it said but I do know...

Barnone, you must have forgot about this.

Yancy, couple of guys had that problem with the hose going to the air injection pump. I think some are defective. You don't need it and I took mine off and covered the hole in the exhaust with a 1/8"...

Barnone, I couldn't find the wire either so I did what I did. The last page in the manual they sent with mine has a wiring diagram. If you need it I'll send you a copy. It has a bunch of things that...

I changed out the headlight on mine to a h5006 and put a switch on it so I can turn it all off if I want.
1260512606

I haven't checked my jets. I read in this thread that at some point the stock jets were resized in the later versions of the 2010 models and since I have not had a problem with any lean burns with...

That looks good axa. I went out and took a closer look at the way the fender is mounted and noticed that when I have to adjust the position of the rear axel for chain stretch it is going to move the...

Maybe you can try bending them to make them longer. Might have to take them off put a one inch block under the end of the fender measure from hole to hole and fab up a new pair. Pain in the ass but...

Bummer, looked like it would just hinge right at that spot to me. Sorry.

I think you should try loosening up the four strut bolts and just lift it to where you want it. I'm happy with mine so I'm not messing with it. I can't imagine that the parts aren't pretty much built...

Wow barnone it looks like the fender was pushed down forcefully. Here's what mine looked like. There is a good half inch between the tire and the tail light wires. ATTACH=CONFIG]12344[/ATTACH]12345
...

That sounds like the problem axa was having with his pump. I'm thinking when Bobthebobber painted his fender he my have inadvertently moved things around and lost the clearance under the rear of the...

After reading Bobthebobbers problem I checked the clearance on the tail on mine and there was a half inch. Barnone, I hope they send a different manual than they sent with my bike as it is almost...