Adventure Motorcycle Magazine Subscribe Now

Page 1 of 5 123 ... LastLast
Results 1 to 10 of 47
  1. #1 QLink/QingQi rack...cause Carl asked me to 
    C-Moto Guru david3921's Avatar
    Join Date
    Jan 2009
    Location
    Wyoming, Michigan USA
    Posts
    287
    I got a rear rack for my Qlink XF200 from Carl and he asked me to post some pictures. I had to figure out how to mount the turn signals as they point kind of funky when re-bolting to the rack. I ended up reversing the direction of the mounting bracket after squareing them up a bit in my vice. This points the signals the wrong way so I took off the lenses and pulled the bulb. I then pulled the plastic housing out of the rubber part and turned them the right way. It's not a perfect fit as there is a gloove and slot that mates the parts together but it holds. I wrapped some electrical tape around the joint to make sure it stays. The lenses have to be swapped as they have small notches in them for water drainage. The bolts supplied are ok for the front mounts but need to be a little longer for the back so I replaced those. The original ones for the grab rails can be re-used without any problems. The rack fits perfect . I know that ChinaV had some problems with the one he got for his new 250;

    http://www.mychinamoto.com/forums/sh...ht=rack&page=3

    All and all I am very pleased with the fit, finish, and price. Thanks again Carl!



    ....I want those foot pegs that ChinaV has next....
    Attached Images
    Reply With Quote  
     

  2. #2  
    Administrator-tron CrazyCarl's Avatar
    Join Date
    Apr 2008
    Location
    NoVA
    Posts
    2,540
    Much thanks Dave! See what happens once people find out you got skillz?

    Looks good and I'm glad it fits up just right. That said, I got 8 left and available for anyone who be interested.

    Paz,
    CC

    P.S. - Don't be surprised if the title of the post changes a little to make it more search friendly.
    ---------------------------------------------------
    Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
    Adventure Motorcycle Dual Sport News Magazine

    Help support MCM!! Buy "The Return - Riding Western China" DVD! -

    http://www.motocyclops.com/buydvd/

    Personal China travel info, photo and video site:

    http://www.carlparker.com

    Reply With Quote  
     

  3. #3 Re: QLink/QingQi rack...cause Carl asked me to 
    Hi Carl, Do you still have one of those racks left and how much do you want for it.
    Reply With Quote  
     

  4. #4 Re: QLink/QingQi rack...cause Carl asked me to 
    Honorary C-Moto Guru
    Join Date
    Jun 2008
    Location
    Gijon, Asturias, Northern Spain
    Posts
    580
    Fitted mine as well. I re-used the longer rear bolts removed from the grab handles as well.

    I looked at my indicators and their brackets for ages, considered making some new ones, but in the end I found a generous length of connecting wire attaching them. This enabled me to move them further rearward, drill two holes in the plastic mudguard and attach them there close to the rear light fitting.

    The rack is magnificent, very strong, with built-in grab handles and a plastic coated finish that won't chip off like paint or need polishing like chrome.

    Thanks for obtaining them for us Carl.
    Jincheng Monkey JC50Q-7
    Skyteam Dax replica ST110-6
    Zongshen ZS125-43
    Qingqi QM200GY-BA Super Motard
    Qingqi QM110GY
    Reply With Quote  
     

  5. #5 Re: QLink/QingQi rack...cause Carl asked me to 
    Administrator-tron CrazyCarl's Avatar
    Join Date
    Apr 2008
    Location
    NoVA
    Posts
    2,540
    Quote Originally Posted by kurt10464 View Post
    Hi Carl, Do you still have one of those racks left and how much do you want for it.
    Sure do! The tune is 60USD shipped on CONUS.

    PM me if interested.

    CC
    ---------------------------------------------------
    Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
    Adventure Motorcycle Dual Sport News Magazine

    Help support MCM!! Buy "The Return - Riding Western China" DVD! -

    http://www.motocyclops.com/buydvd/

    Personal China travel info, photo and video site:

    http://www.carlparker.com

    Reply With Quote  
     

  6. #6 Re: QLink/QingQi rack...cause Carl asked me to 
    Administrator-tron CrazyCarl's Avatar
    Join Date
    Apr 2008
    Location
    NoVA
    Posts
    2,540
    Quote Originally Posted by forchetto View Post
    I looked at my indicators and their brackets for ages, considered making some new ones, but in the end I found a generous length of connecting wire attaching them. This enabled me to move them further rearward, drill two holes in the plastic mudguard and attach them there close to the rear light fitting.
    i also ended up remounting them to the rear fender in China but then the signals pointed inward. I wonder if it would be possible to take block of rubber and make a small wedge to offset the andle of the
    fender?

    CC
    ---------------------------------------------------
    Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
    Adventure Motorcycle Dual Sport News Magazine

    Help support MCM!! Buy "The Return - Riding Western China" DVD! -

    http://www.motocyclops.com/buydvd/

    Personal China travel info, photo and video site:

    http://www.carlparker.com

    Reply With Quote  
     

  7. #7 Re: QLink/QingQi rack...cause Carl asked me to 
    Quote Originally Posted by CrazyCarl View Post
    Sure do! The tune is 60USD shipped on CONUS.

    PM me if interested.

    CC
    HI CARL. Yes I am interested my phone number is (925)946-9881 and my e-mail is kurtdheindel@yahoo.com send me the info so I can get a cashiers check sent to you. Thank you, Kurt
    Reply With Quote  
     

  8. #8 Re: QLink/QingQi rack...cause Carl asked me to 
    C-Moto Noob
    Join Date
    Sep 2009
    Posts
    8
    I´m interessed. I´m from Spain too.
    Reply With Quote  
     

  9. #9 Re: QLink/QingQi rack...cause Carl asked me to 
    C-Moto Senior kingmarty45's Avatar
    Join Date
    Oct 2008
    Location
    Glebe, Sydney. Australia
    Posts
    159
    CC,

    It's quite a rack-et you've got goin on here

    Yeeeesssssssss

    ... everyone was thinking it.
    ---------------------------------------------------
    Kinlon 2008 200GY-SM
    Honda 2003 CB250
    Life is too short for traffic
    Reply With Quote  
     

  10. #10 Re: QLink/QingQi rack...cause Carl asked me to 
    Honorary C-Moto Guru
    Join Date
    Jun 2008
    Location
    Gijon, Asturias, Northern Spain
    Posts
    580
    Quote Originally Posted by camps View Post
    I´m interessed. I´m from Spain too.
    When I discovered that Qingqi fitted racks to some of their models but not the ones imported to Spain, I found the part number, found some actual photos and sent them to Qingqi Iberica the Spanish importer. I told him that if he brought them and sold them as an accessory he would probably sell as many as bikes and make a little money too. Everyone would want one. Never even got a reply.
    Jincheng Monkey JC50Q-7
    Skyteam Dax replica ST110-6
    Zongshen ZS125-43
    Qingqi QM200GY-BA Super Motard
    Qingqi QM110GY
    Reply With Quote  
     

Page 1 of 5 123 ... LastLast

Similar Threads

  1. QingQi 200 GY (Qlink, STx, et al) Repair Manual
    By CrazyCarl in forum Maintenance
    Replies: 29
    Last Post: 03-21-2015, 07:56 PM
  2. Changing fork oil on Qlink QingQi 200
    By david3921 in forum Maintenance
    Replies: 33
    Last Post: 12-15-2013, 02:26 AM
  3. QingQi (Qlink) QM200GY About the clutch
    By ChinaV in forum Maintenance
    Replies: 19
    Last Post: 11-17-2012, 01:30 PM
  4. Exhaust can for Qingqi QM200GY (aka Qlink, etc)
    By forchetto in forum Maintenance
    Replies: 135
    Last Post: 06-22-2011, 01:46 PM
  5. QLink/QingQi 200 Sprockets and Parts
    By C&K POWERSPORTS in forum Deals from Dealers
    Replies: 3
    Last Post: 08-29-2009, 12:54 PM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •