Results 1 to 10 of 47
|
Hybrid View
-
#1 QLink/QingQi rack...cause Carl asked me to07-29-2009, 08:02 PM
I got a rear rack for my Qlink XF200 from Carl and he asked me to post some pictures. I had to figure out how to mount the turn signals as they point kind of funky when re-bolting to the rack. I ended up reversing the direction of the mounting bracket after squareing them up a bit in my vice. This points the signals the wrong way so I took off the lenses and pulled the bulb. I then pulled the plastic housing out of the rubber part and turned them the right way. It's not a perfect fit as there is a gloove and slot that mates the parts together but it holds. I wrapped some electrical tape around the joint to make sure it stays. The lenses have to be swapped as they have small notches in them for water drainage. The bolts supplied are ok for the front mounts but need to be a little longer for the back so I replaced those. The original ones for the grab rails can be re-used without any problems. The rack fits perfect . I know that ChinaV had some problems with the one he got for his new 250;
http://www.mychinamoto.com/forums/sh...ht=rack&page=3
All and all I am very pleased with the fit, finish, and price. Thanks again Carl!
....I want those foot pegs that ChinaV has next....
-
07-29-2009, 09:07 PM
Much thanks Dave! See what happens once people find out you got skillz?
Looks good and I'm glad it fits up just right. That said, I got 8 left and available for anyone who be interested.
Paz,
CC
P.S. - Don't be surprised if the title of the post changes a little to make it more search friendly.---------------------------------------------------
Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
Adventure Motorcycle Dual Sport News Magazine
Help support MCM!! Buy "The Return - Riding Western China" DVD! -
http://www.motocyclops.com/buydvd/
Personal China travel info, photo and video site:
http://www.carlparker.com
-
#3 Re: QLink/QingQi rack...cause Carl asked me to
- Join Date
- Oct 2008
- Posts
- 8
08-27-2009, 10:40 PMHi Carl, Do you still have one of those racks left and how much do you want for it.
-
#4 Re: QLink/QingQi rack...cause Carl asked me to
- Join Date
- Jun 2008
- Location
- Gijon, Asturias, Northern Spain
- Posts
- 580
08-28-2009, 05:16 AMFitted mine as well. I re-used the longer rear bolts removed from the grab handles as well.
I looked at my indicators and their brackets for ages, considered making some new ones, but in the end I found a generous length of connecting wire attaching them. This enabled me to move them further rearward, drill two holes in the plastic mudguard and attach them there close to the rear light fitting.
The rack is magnificent, very strong, with built-in grab handles and a plastic coated finish that won't chip off like paint or need polishing like chrome.
Thanks for obtaining them for us Carl.Jincheng Monkey JC50Q-7
Skyteam Dax replica ST110-6
Zongshen ZS125-43
Qingqi QM200GY-BA Super Motard
Qingqi QM110GY
-
#5 Re: QLink/QingQi rack...cause Carl asked me to08-29-2009, 01:09 PM---------------------------------------------------
Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
Adventure Motorcycle Dual Sport News Magazine
Help support MCM!! Buy "The Return - Riding Western China" DVD! -
http://www.motocyclops.com/buydvd/
Personal China travel info, photo and video site:
http://www.carlparker.com
-
#6 Re: QLink/QingQi rack...cause Carl asked me to08-29-2009, 01:05 PM---------------------------------------------------
Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
Adventure Motorcycle Dual Sport News Magazine
Help support MCM!! Buy "The Return - Riding Western China" DVD! -
http://www.motocyclops.com/buydvd/
Personal China travel info, photo and video site:
http://www.carlparker.com
-
#7 Re: QLink/QingQi rack...cause Carl asked me to
- Join Date
- Oct 2008
- Posts
- 8
09-01-2009, 02:18 AMHI CARL. Yes I am interested my phone number is (925)946-9881 and my e-mail is kurtdheindel@yahoo.com send me the info so I can get a cashiers check sent to you. Thank you, Kurt
-
#8 Re: QLink/QingQi rack...cause Carl asked me to
-
#9 Re: QLink/QingQi rack...cause Carl asked me to
- Join Date
- Jun 2010
- Location
- Richmond , B.C. Canada
- Posts
- 5
07-01-2010, 12:02 AMHi Carl,
Do you have any more of these rack ?
Miin
-
#10 Re: QLink/QingQi rack...cause Carl asked me to07-01-2010, 03:26 AM
Hey Guys....
Sorry for the slack reply. I don't have any for sale but have inquired into getting more.
Sometimes the responses aren't so forthcoming from the other side of the ocean so I unfortunately can't give you any dates but I will try to get some on shore. I will definitely keep you guys posted on its availability on this thread.
If anyone wants to help out, send me PM with other parts you may like to see. Please send a PM only, or this thread may drift.
Paz,
CC---------------------------------------------------
Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
Adventure Motorcycle Dual Sport News Magazine
Help support MCM!! Buy "The Return - Riding Western China" DVD! -
http://www.motocyclops.com/buydvd/
Personal China travel info, photo and video site:
http://www.carlparker.com
« Previous Thread | Next Thread » |
Similar Threads
-
QingQi 200 GY (Qlink, STx, et al) Repair Manual
By CrazyCarl in forum MaintenanceReplies: 29Last Post: 03-21-2015, 07:56 PM -
Changing fork oil on Qlink QingQi 200
By david3921 in forum MaintenanceReplies: 33Last Post: 12-15-2013, 02:26 AM -
QingQi (Qlink) QM200GY About the clutch
By ChinaV in forum MaintenanceReplies: 19Last Post: 11-17-2012, 01:30 PM -
Exhaust can for Qingqi QM200GY (aka Qlink, etc)
By forchetto in forum MaintenanceReplies: 135Last Post: 06-22-2011, 01:46 PM -
QLink/QingQi 200 Sprockets and Parts
By C&K POWERSPORTS in forum Deals from DealersReplies: 3Last Post: 08-29-2009, 12:54 PM
Prime Сasual Dating - Real-life...
Today, 08:19 AM in Off Topic Discussions