QLink/QingQi rack...cause Carl asked me to

**camps** · 09-03-2009, 08:04 AM

Yes forchetto, in qingqi iberica don´t have them.
In Valladolid (my town) don´t have qingqi reseller, buy they are Meko (clone of qingqi). I go this, but aren´t too.
I search internet, and in some resellers they are this part.
I will keep you.
Regards.

**KSM200** · 11-12-2009, 04:47 PM

Hi folks,

In Canada I used a rear rack from Yamaha XT 250, the part number IQG00671YS00, available to any Yamaha dealer or from yamahagenuineparts.com
I had to cut the rear fender and the side panels to fit it. It is a little bit tricky to mount, but here you can see the result:

**CrazyCarl** · 11-12-2009, 06:12 PM

Hey that looks pretty good!

Is that the stock tail light/rear fender?

CC

**camps** · 11-12-2009, 11:28 PM

Thanks KSM200.
Finally i found the original in... Czech Republic!!
http://www.yuki.cz/skutry-motocykly-ctyrkolky/

This model is same of qingqi but in 125cc:

http://www.yuki.cz/skutry-motocykly-...125-tr-88.html

http://www.yuki.cz/skutry-motocykly-...125-sm-96.html

Regards.

**KSM200** · 11-13-2009, 05:36 PM

Re to: "Hey that looks pretty good!
Is that the stock tail light/rear fender?
CC "

Yes, everything on the bike is original for the QM200GY-B (A), except the Yamaha rear rack, Acerbis hand guards, and the Harris crossbar protection. You can see in the photo the rear of the bike before modifications:

Cheers
KSM200

**BUBBA ZANETTI** · 11-30-2009, 01:42 PM

Hi Carl I got the rear rack and it fit perfect.Looks good and very functional.It came with mounting hardware but I swapped them out with some grade 8 allen head bolts.The rack came in less than a week and the price was right. Folks if ya need a rack Carl is the man!

**CrazyCarl** · 11-30-2009, 02:25 PM

Glad it arrived and installed okay. It really baffles me that they don't request racks be installed on these bikes before they're crated.

As always, if you gotz any pictures I'd be glad to see them!

CC

**MICRider** · 02-27-2010, 01:13 AM

Hello all,
Got my rack from Carl last week and put it on. The vendor of my bike had moved the turn signals at the suggestion of the factory and I just had to move them back to their original position. I put the enduro tires on it today as well. I think the rack is going to be mega handy. Here are a couple of pics of the rack and the enduro tires.