Thread: XF200 New Fender and Crack
Results 1 to 8 of 8
|
-
#1 XF200 New Fender and Crack
- Join Date
- Sep 2009
- Posts
- 1
09-10-2009, 06:44 PMhi all,
I'm new to this and am trying to figure out ways to get my xf200 better. So far I have gotten rid of the long rear fender(tag braket) and customized a new mount which still isnt what I want! Also I have a MAJOR problem with vibration on the rear fender! It has vibrated a large crack into the top rear fender! All in all the bike is Great! its my first street bike, I have been racing dirtbikes since i was 5 (20 now!) here are some pics of the new tag bracket and the crack from vibration.... Has any one else had this probel with the rear fender?? This is the second rear fender for this bike!
look at the cracks!!!!!
-
#2 Re: New QingQi200GY/XF200 Slip-on pipe!09-11-2009, 07:23 AM
that happens on evry bike evan on mine in Macedonia i have problems with parts for the bike............ the distributors SUCKS
-
#3 Re: XF200 New Fender and Crack09-12-2009, 05:58 PM
Bubba,
Welcome to the forum. I had two versions of this bike (the enduro model) in China and took it over some crazy roads with no signs of cracking. I think the problem may be the motards could use a painted plastic which is prehaps a little more brittle. Check for over tightened screws.
The enduros use an extremely strong and felxible color-in-plastic. If you can replace the back plastic from one of the enduro models, you may solve your problems although the colors may not be the same (hard to go wrong with black though).
Let us know how it goes!
CC---------------------------------------------------
Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
Adventure Motorcycle Dual Sport News Magazine
Help support MCM!! Buy "The Return - Riding Western China" DVD! -
http://www.motocyclops.com/buydvd/
Personal China travel info, photo and video site:
http://www.carlparker.com
-
#4 Re: XF200 New Fender and Crack09-14-2009, 11:11 PM
The plastics on my Kinlon are made out of old chinese newspapers stuck together with only hopes and prayers. The plastics on the tank are cracking everywhere, both sides below the seat have cracked through... shame but what can you do?
---------------------------------------------------
Kinlon 2008 200GY-SM
Honda 2003 CB250
Life is too short for traffic
-
#5 Re: XF200 New Fender and Crack09-15-2009, 01:34 PM
Start up a fibreglass molding shop in your garage and make custom panels?
CC---------------------------------------------------
Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
Adventure Motorcycle Dual Sport News Magazine
Help support MCM!! Buy "The Return - Riding Western China" DVD! -
http://www.motocyclops.com/buydvd/
Personal China travel info, photo and video site:
http://www.carlparker.com
-
#6 Re: XF200 New Fender and Crack
-
#7 Re: XF200 New Fender and Crack09-16-2009, 03:13 PM
Fibreglass mate... make your own panels from scratch!
C---------------------------------------------------
Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
Adventure Motorcycle Dual Sport News Magazine
Help support MCM!! Buy "The Return - Riding Western China" DVD! -
http://www.motocyclops.com/buydvd/
Personal China travel info, photo and video site:
http://www.carlparker.com
-
#8 Re: XF200 New Fender and Crack
- Join Date
- Jan 2011
- Location
- Fla.
- Posts
- 26
04-22-2011, 09:37 PMI took the rear fender off my XF200 and coated all the mounting points with JB weld epoxy and then filled the top side crack with more JB epoxy and it has heald up for a few months since fix. Look in the modifications section for a post from Cab4less and you will see pictures of the underside of fender. I also drilled a hole in top side of fender and ran a bolt through to bracket on underside to keep both pieces togther and reuce vibration. Hope this helps. Florida larry
« Previous Thread | Next Thread » |
комедии 2024 русские
04-29-2024, 07:03 AM in Off Topic Discussions