Thread: Exhaust header bolt sizes?
Results 1 to 10 of 17
|
-
#1 Exhaust header bolt sizes?05-29-2010, 11:33 AM
Hi All
I have searched this site and the net, and I can't find anything that will tell me what size the bolts are for the exhaust header on my Pulse Adrenaline K157 FMI.
Does anyone know? I need to replace the badly rusted ones that are on there now. I could source an original part from a supplier without knowing the size, but I would rather source a better quality such as a stainless steel etc etc.Sparky
--------------------------------------------------------------------------
Pulse Adrenaline 125 (XF125GY-2B)
-
#2 Re: Exhaust header bolt sizes?
-
#3 Re: Exhaust header bolt sizes?05-29-2010, 01:10 PM
If it was that simple, I think i would have done that by now. But, there are two reasons why i cant. I need to use the bike to get to the hardware store, and because the bolts are badly rusted if i take them out i wont really be able to put them back in. Plus, i might be able to measure the length but the diameter and thread type needs to be spot on.
But thank you for your suggestion.Sparky
--------------------------------------------------------------------------
Pulse Adrenaline 125 (XF125GY-2B)
-
#4 Re: Exhaust header bolt sizes?05-29-2010, 08:54 PM
Well I decided to take the bolts out, (with some trouble I must add) and was surprised to see how badly corroded they were. I ended up taking them to my local Halfords in the end, and bingo, I managed to find a match.
For anyone interested, the exhaust manifold bolts were a M8 x 25mm.
I thought as i am going to the effort of changing the bolts, that i would opt for the stainless steel version that they had available, just incase they ever need to come off again, plus they would also improve the looks too.
Here are the stainless bolts, which cost me £4.29 for three
Exhaust bolt m8x2&.jpg
And here's the original look (black) available at £1.79 for three
Exhaust bolt m8x2&.jpgSparky
--------------------------------------------------------------------------
Pulse Adrenaline 125 (XF125GY-2B)
-
#5 Re: Exhaust header bolt sizes?05-29-2010, 09:03 PM
I'm thinking that as I am going to the effort of replacing the bolts, that it would be a shame to leave the exhaust all rusty. So, weather permitting I am going to give the manifold and exhaust a good clean and a fresh coat of VHT black paint.
If anyone is interested I could take some before, during and after shots.Sparky
--------------------------------------------------------------------------
Pulse Adrenaline 125 (XF125GY-2B)
-
#6 Re: Exhaust header bolt sizes?05-29-2010, 10:31 PM
I am fer sure interested Please do make a report
-
#7 Re: Exhaust header bolt sizes?05-31-2010, 12:11 PM
Here are some before shots, as you can see it has weathered quite badly. The exhaust bolts were quite badly corroded, and I had to hammer in a slightly oversized hex bit to ensure I didnt round off the head.
Photo0054..jpg Photo0061..jpg
Before & after
Photo0055..jpgPhoto0051..jpg Photo0060..jpg
Before & afterLast edited by sparky; 05-31-2010 at 12:41 PM.
Sparky
--------------------------------------------------------------------------
Pulse Adrenaline 125 (XF125GY-2B)
-
#8 Re: Exhaust header bolt sizes?05-31-2010, 12:36 PM
And here are some more after shots,
Photo0059..jpg
Photo0058..jpg
I used Hammerite satin finish for the silencer, to give it a slightly more glossy look.
Jobs to do now;
- Drill out the heat sheild bolts that snapped off
- Replace the silencer clamp that also snapped when i tried to remove it.
Sparky
--------------------------------------------------------------------------
Pulse Adrenaline 125 (XF125GY-2B)
-
#9 Re: Exhaust header bolt sizes?05-31-2010, 02:49 PM
Omg your bike is hi-tec, you have an oil filter xD
+ I am waiting for next year and similar issues with my bike. Repairs causing more things to repair.
-
#10 Re: Exhaust header bolt sizes?05-31-2010, 07:42 PM
omg! Doesn't yours??? lol
What issues are you having with your bike? What bike do you have?Sparky
--------------------------------------------------------------------------
Pulse Adrenaline 125 (XF125GY-2B)
« Previous Thread | Next Thread » |
Similar Threads
-
exhaust pipe
By my_bloody_shineray in forum MaintenanceReplies: 5Last Post: 12-14-2011, 05:25 PM -
exhaust
By my_bloody_shineray in forum MaintenanceReplies: 0Last Post: 06-21-2009, 11:51 AM -
A little advice on a new exhaust...
By Rainer in forum Modifications (Cosmetic and Performance)Replies: 7Last Post: 04-20-2009, 02:32 PM -
Lost front brake caliper bolt
By kingmarty45 in forum MaintenanceReplies: 7Last Post: 01-22-2009, 04:48 AM
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions