Adventure Motorcycle Magazine Subscribe Now

Results 1 to 10 of 10
  1. #1 rear sprocket needeed for adrenaline pulse. 
    C-Moto Noob
    Join Date
    Jan 2010
    Posts
    8
    Can anyone tell me where i can get my hands on a replacement rear sprocket for adrenaline pulse 125 08 model? Have tried two companies so far and both have required the dimensions and how many teeth. I am also unsure of the correct amount of teeth of the original. I have a 16 tooth front sprocket ready for replacement. Without going too mad on messin with gear ratios e.t.c think it's best to stick with original rear set up.
    Thanks D.
    Reply With Quote  
     

  2. #2 Re: rear sprocket needeed for adrenaline pulse. 
    C-Moto Senior davidqc's Avatar
    Join Date
    Oct 2009
    Location
    Snowdonia NP, North Wales, UK
    Posts
    110
    Hi Dan. Have a look at previous posts, here: http://www.mychinamoto.com/forums/sh...=rear+sprocket
    and here: http://www.mychinamoto.com/forums/sh...prockets/page6

    The last one goes on a bit. Like Leo Tolstoy's 'War and Peace'.
    '09 Huoniao (Firebird) HN125-8 motorcycle [eBay bike-in-a-box]
    Aprilia SR50 LC Racing scoot
    Reply With Quote  
     

  3. #3 Re: rear sprocket needeed for adrenaline pulse. 
    C-Moto Regular Sprocket's Avatar
    Join Date
    Dec 2009
    Location
    Devon,UK
    Posts
    95
    The bike importers sell rear rings in 48t and 51t, but I suppose you are looking for other ratios or parts from other after market suppliers, whom I myself have found what you have said, but at least you have been asked for dimensions, me, I just get; what bike mate ?, a what ?, hahahahaha, no, we don't do anything for them. But if you supply the dimensions they ask for, at least you have a helpful vendor, who actually wants to make a sale.

    Perhaps you could supply the vendors with the bolt pattern dimensions and centre hole dimensions and say, what have you got that fits the dimensions, that will tax them, someone who asking based on specifications and dimensions, not bike make and model.

    16 t front sprocket for a Pulse Adrenaline, is your engine output shaft multi splined, I think 19 splines, if so, where did you get the sprocket ? I got a 16t recently from a supplier who told me it would fit, but it turned out it didn't, as it was for a six splined output shaft, contacting the supplier, he told me I had the cheap low power suzuki based motor and it won't fit, most Chinese bikes have the stronger six spline, based on the Honda motors. My annoyance was being told the sprocket would fit and when it didn't, my ride being more or less insulted, as a result, I will not be dealing with that company again, as my belief is they did not know what they were talking about, they assumed a part would fit, they did not check before flapping their lips.
    '07 Pioneer Pulse Adrenaline 125, ( XF 125 GY ) Suzuki clone ; K157 FMI engine
    Reply With Quote  
     

  4. #4 Re: rear sprocket needeed for adrenaline pulse. 
    C-Moto Not-so-Noob sparky's Avatar
    Join Date
    May 2010
    Location
    Hertfordshire, UK
    Posts
    20
    Hi Dan

    There are two default rear sprockets for the Pulse Adrenaline, and the one you want will depend on the version of bike you have. The rear drum version used a 6 stud pattern 48 tooth sprocket (428-48t) and the rear disc version used a 4 stud pattern 51 tooth sprocket (428-51t).

    Try using www.chinesemotorcyclepartsonline.co.uk who can supply all the parts for the Pulse and other chinese bikes from the UK. They also have different size sprockets should you wish to alter the gearing ratio, all you need to specify is whether its a disc or drum version.

    I noticed you mentioned having a 16t replacement front sprocket. Is this what you had on it previously? As i thought the standard size was 15t.

    Sparky
    Reply With Quote  
     

  5. #5 Re: rear sprocket needeed for adrenaline pulse. 
    C-Moto Noob
    Join Date
    Jul 2010
    Location
    Nottingham,Uk
    Posts
    5
    Quote Originally Posted by Dan View Post
    Can anyone tell me where i can get my hands on a replacement rear sprocket for adrenaline pulse 125 08 model? Have tried two companies so far and both have required the dimensions and how many teeth. I am also unsure of the correct amount of teeth of the original. I have a 16 tooth front sprocket ready for replacement. Without going too mad on messin with gear ratios e.t.c think it's best to stick with original rear set up.
    Thanks D.
    Hiya, 16th front and you want 38th for the rear, Sounds like it may climb tree's but it wont it will be very fast and yo are gonna want the kamikazi coil(single spade) & cdi(4into2) for gy6 engine both can be got off ebay and I wouldn't bother with LLexeterthey are expensive my mate own's this one: https://www.pioneernevada-parts.co.uk/zenshop/ and tell him Frisco from my forum sent you?
    Keep it rubber side down
    Reply With Quote  
     

  6. #6 Re: rear sprocket needeed for adrenaline pulse. 
    C-Moto Regular
    Join Date
    Oct 2009
    Location
    Portugal
    Posts
    80
    Quote Originally Posted by sparky View Post
    Hi Dan

    There are two default rear sprockets for the Pulse Adrenaline, and the one you want will depend on the version of bike you have. The rear drum version used a 6 stud pattern 48 tooth sprocket (428-48t) and the rear disc version used a 4 stud pattern 51 tooth sprocket (428-51t).

    Try using www.chinesemotorcyclepartsonline.co.uk who can supply all the parts for the Pulse and other chinese bikes from the UK. They also have different size sprockets should you wish to alter the gearing ratio, all you need to specify is whether its a disc or drum version.

    I noticed you mentioned having a 16t replacement front sprocket. Is this what you had on it previously? As i thought the standard size was 15t.

    Sparky
    Hi
    I have a Drum version of pulse adrenaline 125 and it has a 51 teeth rear sprocket (428-51T), mounted with 6 bolts.
    Cheers
    Reply With Quote  
     

  7. #7 Re: rear sprocket needeed for adrenaline pulse. 
    Senior C-Moto Guru humanbeing's Avatar
    Join Date
    Dec 2008
    Posts
    1,509
    Quote Originally Posted by superfamous View Post
    Hi
    I have a Drum version of pulse adrenaline 125 and it has a 51 teeth rear sprocket (428-51T), mounted with 6 bolts.
    Cheers
    You may e-mail JT sprocket (w /measurment) to find a compitable one---JTR809 seems fits . Then u can source it "cheap" locally, If that fails, there's option bought it from china.
    51t http://item.taobao.com/item.htm?id=5358289631
    48t http://item.taobao.com/item.htm?id=5048199451
    Last edited by humanbeing; 10-05-2010 at 10:28 AM.
    Reply With Quote  
     

  8. #8 Re: rear sprocket needeed for adrenaline pulse. 
    C-Moto Regular
    Join Date
    Oct 2009
    Location
    Portugal
    Posts
    80
    Quote Originally Posted by humanbeing View Post
    You may e-mail JT sprocket (w /measurment) to find a compitable one---JTR809 seems fits perfectly. Then u can sorce it "cheap" locally, If that fails, there's option bought it from china.
    51t http://item.taobao.com/item.htm?id=5358289631
    48t http://item.taobao.com/item.htm?id=5048199451
    Hi Humanbeing

    As I told You I have a drum version of pulse, but I'll upgrade it with a rear disc. I have to change the rear wheel too.
    As far as I know the rear sprocket is mounted with 4 bolts in the disc version, am I right?
    Can you tell me a URL of taobao where I can buy the right one to mount in the disc version wheel? I thinkin of using a 45 or 48 teeth sprocket.
    Thank you for your help because try to understand chinese is pretty hard for me.
    Mario
    Reply With Quote  
     

  9. #9 Re: rear sprocket needeed for adrenaline pulse. 
    Senior C-Moto Guru humanbeing's Avatar
    Join Date
    Dec 2008
    Posts
    1,509
    http://www.mychinamoto.com/forums/showthread.php?2201
    Check the "JTR810" locally/ 45T (Suzuki Geniune parts) in taobao http://item.taobao.com/item.htm?id=6882863261
    Reply With Quote  
     

  10. #10 Re: rear sprocket needeed for adrenaline pulse. 
    C-Moto Not-so-Noob
    Join Date
    Jun 2010
    Posts
    26
    jtsprockets have had an update and allow you to search for your exact bike just rebranded, on the site they call the bike kreidler aka pulse etc etc

    http://www.jtsprockets.com/100.0.html?&L=0&id=38
    Reply With Quote  
     

Similar Threads

  1. rear 520 sprocket
    By andy375 in forum Parts Desk
    Replies: 14
    Last Post: 02-12-2010, 08:08 PM
  2. Rear Sprocket crossover
    By mike1346 in forum Modifications (Cosmetic and Performance)
    Replies: 1
    Last Post: 01-26-2010, 09:50 PM
  3. Skyteam ST50 3SM rear sprocket replacement
    By stone6356 in forum Modifications (Cosmetic and Performance)
    Replies: 1
    Last Post: 11-26-2009, 05:51 PM
  4. Shineray XY250GY-2 Rear sprocket help
    By pinchers in forum Modifications (Cosmetic and Performance)
    Replies: 2
    Last Post: 04-01-2009, 07:00 AM
  5. Qlink XF200 44 tooth rear sprocket.
    By volksjagger in forum Modifications (Cosmetic and Performance)
    Replies: 13
    Last Post: 12-16-2008, 05:16 AM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •