Qingqi supermotard Weird behaivour of turn signals

[andres357mag]

Any idea of what can happens?

when I activate the turn signal swicht at idle motor speed, the lights don't flash. Sometime stays ON sometimes OFF an sometimes stays ON but dimed.

As soon as I throtle the engine to 3500RMP they start to flash normaly.


Everything seems normal.


Help Please

andres357mag

[CrazyCarl]

Good place to start is to check the wiring to your signal control box. Remove and re-seat all connections. I think it's behind the left rear panel.

CC

[davidqc]

Sounds to me that the flahser unit is kaput, or some elec connectors have oxidised or come loose (as CC's post). I trust you have already used the WD-40.

[ChinaV]

andres357mag, are they LED turn signals?

[dacru]

Hello,

I have the same problem with my turn signals and they dont flash any more(burn constantly) does anyone have the solution yet?

[davidqc]

...does anyone have the solution yet?

Yep. Call 0900 0009 9990.

ExorcistPriest.jpg

[andres357mag]

They are normal bulbs. Not Leds. To make more complex my doubts:

After put the original post I open the lamps and remove the lights (one seems to be jamed, I could't remove it) clean the contacts a litle (not much dirt or rust) and when I reinstall them turn signals work normaly just to stop working at all at he return of a 1/2 day trip to another city. Being at the road without them is a pain in the seat.

I will check your tips and those from the service manual.

Thanks for the phone numeber davidqc. I will try it as last resort couse is a long distance call.

andres357mag

[Ed209]

Try giving the battery a charge with an Optimate or similar.I had this problem amd doing this cured it.Alternatively, ditch the crappy OEM battery for a good quality replacement.

[andres357mag]

Try giving the battery a charge with an Optimate or similar.I had this problem amd doing this cured it.Alternatively, ditch the crappy OEM battery for a good quality replacement.

I already change that battery a few weeks before. It was the flasher unit that kaput. Second one in less than 20 000 Km.

This time I wrap the unit to made it waterproof Hope this help.

Thanks for the advices.

[ishie]

having a problem on my turn signal assembly coz when i hit it they both blink. According to the wiring diagram, there are two wires to the turn signal. The running light and the blinker. If I have the ignition in the acc. position (no running light) everything works and blinks fine. is there anyone help me bout it? thanks!