Adventure Motorcycle Magazine Subscribe Now

Results 1 to 8 of 8
  1. #1 Stalling high rpm qingqi 200gy 
    C-Moto Noob
    Join Date
    Nov 2009
    Posts
    5
    Hello all,

    Since a few days my qingqi has a stalling problem in the high rpm. I made a video so you can see what Im talking about, I know this isnt good for the bike but i had to show this because this also happens when Im driving. My modifactions are: rejetted to 128, kamikaze pro cdi, removed SAI and a new exhaust. I also cleaned the carbourator and the main jet and the problem is still there. What could be wrong? This is the link:

    Greets,

    Dacru
    Reply With Quote  
     

  2. #2 Re: Stalling high rpm qingqi 200gy 
    C-Moto Guru david3921's Avatar
    Join Date
    Jan 2009
    Location
    Wyoming, Michigan USA
    Posts
    287
    Hitting the rev limiter?
    Reply With Quote  
     

  3. #3 Re: Stalling high rpm qingqi 200gy 
    C-Moto Noob
    Join Date
    Nov 2009
    Posts
    5
    Hi,

    I thought that the rev limiter on the Kamikaze pro was 12.000 rpm. So I dont think it is the limiter. Does anyone else have the same problem with the Kamikaze cdi ?
    Reply With Quote  
     

  4. #4 Re: Stalling high rpm qingqi 200gy 
    Administrator-tron CrazyCarl's Avatar
    Join Date
    Apr 2008
    Location
    NoVA
    Posts
    2,540
    This is really not the kind of engine anyone should be taking to 12,000 rpm.... or even 9,000 for that matter. Testing how an engine performs in neutral really won't tell you much about how it will go down the road. An engine working under load usually behaves quite differently.

    Does it have problems when it's on the street and not at 9k rpm? Also, it sounds like you may have a valve or engine noise.

    CC
    ---------------------------------------------------
    Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
    Adventure Motorcycle Dual Sport News Magazine

    Help support MCM!! Buy "The Return - Riding Western China" DVD! -

    http://www.motocyclops.com/buydvd/

    Personal China travel info, photo and video site:

    http://www.carlparker.com

    Reply With Quote  
     

  5. #5 Re: Stalling high rpm qingqi 200gy 
    C-Moto Noob
    Join Date
    Nov 2009
    Posts
    5
    I tested in the neutral because I dont have a on board cam. I found the stalling weird because it didnt do it before. It is around 9k rpm when driving and I know you shouldn t drive at these high revs but normally he shouldn t stall even at 9k rpm, right? it is also weird that sometimes the stalling starts at 8krpm. I was only wondering of this was normal if it is Im not going to change someting.
    Reply With Quote  
     

  6. #6 Re: Stalling high rpm qingqi 200gy 
    C-Moto Not-so-Noob
    Join Date
    Aug 2009
    Posts
    25
    Not sure if this is the same but sounds similar to a probpem I had with my chinese rocket. I wuod be driving happily at aroung 7 - 8 k and suddenly engine stall. bike stoppped and could not restart for a few minutes. Then suddenly can restart. Turns ouot to be a short right by the coil where the HT lead comes out. It had been rubbing on the frane and vibration wore the insulation. Was only able tosee the arcing when revvingthe engine high, then arc was visible and engi9ne cuts out. Amazing. I think the electrics go craxzy for a while and aftre a few minutes canb restart the bikew. Fixed with some insulation tape. Wierd I know but could be what your getting.
    Reply With Quote  
     

  7. #7 Re: Stalling high rpm qingqi 200gy 
    Administrator-tron CrazyCarl's Avatar
    Join Date
    Apr 2008
    Location
    NoVA
    Posts
    2,540
    Even with brand new, non-rubbed insulation the spark can still short though if it's touching the frame. If you can shock yourself by touching the HT wire then wrap the thing in a couple layers of tape!

    CC
    ---------------------------------------------------
    Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
    Adventure Motorcycle Dual Sport News Magazine

    Help support MCM!! Buy "The Return - Riding Western China" DVD! -

    http://www.motocyclops.com/buydvd/

    Personal China travel info, photo and video site:

    http://www.carlparker.com

    Reply With Quote  
     

  8. #8 Re: Stalling high rpm qingqi 200gy 
    C-Moto Noob
    Join Date
    Nov 2009
    Posts
    5
    Hello,

    Thanks for the reactions and i will look into the HT wire. Has anyone problems with the sparkplug cap because its from metal? Should it be better to replace the cap?

    Dacru
    Reply With Quote  
     

Similar Threads

  1. Qingqi 200GY-BA Motard Rear Suspension
    By DeSaint in forum Maintenance
    Replies: 14
    Last Post: 06-05-2009, 02:14 PM
  2. Head torque on QingQi 200GY?
    By tinod in forum Maintenance
    Replies: 2
    Last Post: 04-03-2009, 06:50 PM
  3. My Qingqi QM-200GY
    By vladg in forum Welcome to MCM!
    Replies: 20
    Last Post: 10-16-2008, 08:54 PM
  4. QingQi 200GY Sponsor Bike Thread...
    By CrazyCarl in forum Dirt n' Dual-Sport
    Replies: 8
    Last Post: 05-29-2008, 01:21 AM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •