Results 11 to 20 of 42
|
-
#11 Re: TMEC 125-1 Air Filter and Re-Jet?
- Join Date
- Jun 2011
- Location
- basingstoke
- Posts
- 35
09-29-2011, 07:41 PMhave you taken the baffle out of the exhaust and have u rejetted the carb? it you take the baffle out it will make it bog down in 1st the carb will have the make written on the side and you need to measure the diamiter of the intake. however if the make is mikuni then you are likly to have a VM22 jets are easy to come by i would advise that you buy a few different sizes and see whice one work best for you (that bit applies for ALL makes of carb)
-
#12 Re: TMEC 125-1 Air Filter and Re-Jet?
- Join Date
- Oct 2011
- Location
- Redditch
- Posts
- 19
10-25-2011, 09:21 PMHelp ..............................
Hello first off ............... :)
I need spares for my sons Tmec 125 Enduro.
Please give me some dealers names ..................
Thanks chaps
-
#13 Re: TMEC 125-1 Air Filter and Re-Jet?
- Join Date
- Nov 2011
- Location
- United Kingdom
- Posts
- 38
11-18-2011, 07:06 AMdid you find a parts dealer
also what was done for the conformity test
-
#14 Re: TMEC 125-1 Air Filter and Re-Jet?
- Join Date
- Oct 2011
- Location
- Redditch
- Posts
- 19
11-18-2011, 06:42 PMNo parts dealer found as of yet .......................... :(
As for the conformity test. The original dealer who imported the bike took care of all the paperwork except the registration, which in itself was a bit of a pain.
So I is still on the hunt for a reliable parts dealer, who wont dissapear in a puff of smoke.
-
#15 Re: TMEC 125-1 Air Filter and Re-Jet?
- Join Date
- Nov 2011
- Location
- United Kingdom
- Posts
- 38
11-18-2011, 10:08 PMis it that bad there was 1 add on the net but with a puff of smoke
i live in bidford on avon not far from you so if i find 1 ill let ya no]
-
#16 Re: TMEC 125-1 Air Filter and Re-Jet?
- Join Date
- Nov 2011
- Location
- United Kingdom
- Posts
- 38
11-18-2011, 10:20 PMhey can you help on the head tube on the one side is a vin no plate then on the other theres a small hole is there a plate on both sides on yours i just bought it and now im worried
-
#17 Re: TMEC 125-1 Air Filter and Re-Jet?
- Join Date
- Oct 2011
- Location
- Redditch
- Posts
- 19
11-20-2011, 08:36 PMVIN Plate is sat just off centre below the handlebars on the left of the headstock as you sit on the bike, there is nothing at all other than that on it. There as several 2mm holes on the right on the headstock so it looks like you is ok my friend ...............
If you come across a semi local dealer I would be happy to be informed and if I do I will let you know ..............
-
#18 Re: TMEC 125-1 Air Filter and Re-Jet?
- Join Date
- Nov 2011
- Location
- United Kingdom
- Posts
- 38
11-20-2011, 08:45 PMpheew relief cheers man when i find a dealer will post have heard is same bike as the 200 so parts same as with diff engine
-
#19 Re: TMEC 125-1 Air Filter and Re-Jet?
- Join Date
- Oct 2011
- Location
- Redditch
- Posts
- 19
11-21-2011, 05:35 PMThats interesting about the 200cc engine .................
Might buy the bike off my son when he's done wreaking it and try for a conversion....
Mind you it will need an upgrade on the rear wheel bearing which is on the way out as I type....... :(
-
#20 Re: TMEC 125-1 Air Filter and Re-Jet?
- Join Date
- Oct 2011
- Location
- Redditch
- Posts
- 19
11-24-2011, 08:08 PMFound a parts dealer ..............................
Although not local, they are very friendly over the phone and have put my request for a speedo cable though to the suppliers
in China and expect it to arrive in around a week. All this without payment up front as well.........
So we are in the waiting game mode.
Here is the url http://myworld.ebay.co.uk/tabbikeimp...id=p4340.l2559
Will let you know on results.
« Previous Thread | Next Thread » |
Similar Threads
-
Filter Oil - Qingqi 125
By superfamous in forum MaintenanceReplies: 7Last Post: 01-23-2013, 03:55 PM -
Air filter and battery modification.
By Valts in forum Modifications (Cosmetic and Performance)Replies: 8Last Post: 09-09-2012, 12:39 PM -
Qingqi QM200GY (Qlink, STX, Pulse, etc) alternative air filter
By forchetto in forum Modifications (Cosmetic and Performance)Replies: 20Last Post: 05-18-2010, 06:39 PM -
Ron Patrick's jet-powered Honda scooter
By Supersignet in forum Off Topic DiscussionsReplies: 4Last Post: 11-03-2009, 03:32 PM -
Standard Air/Fuel mixture and Idle screw Settings for a Mikilon M96 125-SB
By da beard in forum MaintenanceReplies: 3Last Post: 10-23-2009, 06:42 PM
A Working VPN Solution?
04-11-2024, 03:10 AM in Off Topic Discussions