Thread: Hi folks
Results 1 to 9 of 9
|
-
#1 Hi folks08-04-2010, 12:05 PM
Hi There
new here obviously :) ...
I may be posted to Shanghai in the next few months ...
a few questions that perhaps someone here may be able to assist with
Firstly is there any classic racing in China ? suitable for a 70s Triumph
second if so and if not are track days available in Shanghai or nearby ?
third ... how much effort is it to get a classic racer into China ?
The bike is a 1972 Rob North Trident ...
many thanks
steve
-
#2 Re: Hi folks
- Join Date
- Dec 2009
- Location
- mostly Shanghai, sometimes northern California
- Posts
- 3,222
08-04-2010, 01:34 PMWelcome snibor.
You're traveling through another dimension -- a dimension not only of sight and sound but of mind. A journey into a wondrous land whose boundaries are that of imagination. That's a signpost up ahead: your next stop: the Chinese Motorcycling Zone!
You unlock this door with the key of imagination, and leave your cherished expectations behind. Beyond it is another dimension: a dimension of sound, a dimension of sight, a dimension of mind. A dimension where everything you believed was true about motorcycling no longer holds. A 1972 Rob North Trident might as well be a fish riding a bicycle. You're moving into a land of both shadow and substance, of things and ideas. Just not quite what you expected. You've just crossed over into... the Chinese Motorcycling Zone.
There is a fifth dimension beyond that which is known to man. It is a dimension as vast as space and as timeless as infinity. It is the middle ground between light and shadow, between science and superstition, and it lies between the pit of man's fears and the summit of his knowledge, where all that should be easy is difficult, and all that should be difficult is, well, even harder. This is the dimension of imagination -- where we imagine a less restrictive future, and lust for a more permissive past. It is an area which we call The Chinese Motorcycling Zone.
Welcome!jkp
Shanghai
2010 JH600 "Merkin Muffley" (in Shanghai)
2000 KLR650 "Feezer Ablanalp" (in California)
-
#3 Re: Hi folks08-04-2010, 03:31 PM
nice welcome :)
"You unlock this door with the key of imagination, and leave your cherished expectations behind."
i could do with some of that what ever it is you are on :)
-
#4 Re: Hi folks
- Join Date
- Dec 2009
- Location
- mostly Shanghai, sometimes northern California
- Posts
- 3,222
08-04-2010, 03:44 PMWell, that was just a metaphorical way of breaking the unpleasant news to you -- that it's darn near impossible to bring a non-new bike into China. MCM is a tremendous repository of knowledge and up-to-date advice about al things motorcycling in China. One recent post reported on a 1 July regulation that flat-out prohibited import of bikes that are not new. Imports of new bikes are subject to duties of 100% or more, and some cities such as Guangzhou ban bikes outright. Shanghai follows a policy of restriction. There's a limited list of bikes that can be legally registered, and these are in two classes -- those that are restricted to parts of the city outside the inner ring road and those that want to ride within the ring road, which of course includes the central business district. The non-CBD Hu C plate will cost you maybe 20,000 RMB, while the Hu A plate is currently fetching 42,000 RMB or more. Yes, that's 12,000 more than I paid for my Jialing JH600.
There are a couple of tracks in the Shanghai suburbs, including a world-class Formula 1 circuit. And there are people, also in our forum, who can get you on the track -- more likely on one of their gray-market bikes than on your own.
My intention is not to frighten or depress you. This is simply the hand we are dealt. There are a growing number of us in Shanghai and many other cities who are riding daily, and enjoying the experience immensely. But, as I said in the intro, you need to check all expectations of "the way it works at home" before you arrive. Riding here is not like anywhere else. It's a blast, but pretty otherworldly.
Care for a toke?
cheersjkp
Shanghai
2010 JH600 "Merkin Muffley" (in Shanghai)
2000 KLR650 "Feezer Ablanalp" (in California)
-
#5 Re: Hi folks08-04-2010, 04:10 PM
no thanks ... spliff off :)
many thanks for the reply ... much clearer 2nd time around :)
this bike is not for road use ... only a track bike ... will never be registered for the road ....
be a nightmare on the road anyway... so small hard to get on , has a close ratio gearbox and very lumpy cams and runs 12.5-1 compression so road fuel would eat pistons ...
I would if possible like to be able to take it with me to work on it in some spare time i may have ... it is entered in the Isle of man Manx GP next year and i need time to do some engine work whilst i am up there ... and test ...
Track days would be a very useful way of testing stuff out ...
a local Dyno would be a great asset as well ... is there a Dyno facility in Shanghai???
many thanks
snibor
-
#6 Re: Hi folks
- Join Date
- Dec 2009
- Location
- mostly Shanghai, sometimes northern California
- Posts
- 3,222
08-04-2010, 05:25 PMBigger trick would be getting the bike into China. Once in, whether legally or otherwise, you could do the things you are proposing, presumably including the dyno, though you'll need to touch base with others to learn more about that. But chances of getting it in legally are slim to zero.
Others may have differing opinions on this.
Safe to guess your surname is Robins?
cheersjkp
Shanghai
2010 JH600 "Merkin Muffley" (in Shanghai)
2000 KLR650 "Feezer Ablanalp" (in California)
-
#7 Re: Hi folks
- Join Date
- Dec 2009
- Location
- mostly Shanghai, sometimes northern California
- Posts
- 3,222
08-04-2010, 05:27 PMhere are the folks to talk to about track riding, and performance tuning, etc.
BG Performance
good luckjkp
Shanghai
2010 JH600 "Merkin Muffley" (in Shanghai)
2000 KLR650 "Feezer Ablanalp" (in California)
-
#8 Re: Hi folks
-
#9 Re: Hi folks
- Join Date
- May 2009
- Location
- Qingdao
- Posts
- 282
08-07-2010, 01:08 AMTry on importing it as "Artpiece" with your moving goods. Or ship it as Automobile/Motorcycle parts (partly dissasembled for sure in seperate shipments) - that way be sure around 10% custom duties apply!
« Previous Thread | Next Thread » |
Similar Threads
-
Happy Halloween folks!!!
By CrazyCarl in forum Off Topic DiscussionsReplies: 12Last Post: 11-03-2008, 08:29 AM -
Hi folks, greetings from Poland. CU in China...
By sambor1965 in forum Welcome to MCM!Replies: 12Last Post: 07-11-2008, 09:33 AM
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions