I purchased a new Konker SM200 for my daughter for Christmas. Since I wasn't doing anything today I decided to take it apart! Two reasons, one to check how much grease was put on the swing arm bearings and shock mounts. I had done this previously on my KLR 650 and as others had noted on that forum, not much gets greased upon assembly. It would also give me a good look at how this bike is built; welding, tight nuts and bolts, wiring etc. It is winter here so I have the next three months to check things out.
So here are a few pics and some comments along the way. I hope it may help others also.

New motorcycle
IMG_1709.jpg

Starting to come apart
IMG_1710.jpg
The other side
IMG_1711.jpg
Just getting the hang of putting pictures in here. Picture manager says I can only put 5 per post so I'll save this and do another.