Dong Fang DF 250 RTB Bobber Information

[Mixmaster]

I was using a mechanic engineer to do some welds on my new tank for me and he was giving it the once over. Also suggested I work through replacing all the nuts and bolts as they are pretty soft.
he was thinking along the lines of crank case breather, definitely wasn't brainwashed with emission rules. As we are in NZ and he mainly works on performance vehicles. Random fact -his Dad worked with Carol Shelby and was chief mechanic on the Shelby Daytona coupe, i was drooling over a cobra in the workshop.

I just thought I should throw it out there, but you guys have got the miles on the DF and the bike knowledge so i will relax.

p.s spring has arrived here and amazing riding weather

[ghost1133]

Just ride the shit out of it. 1500 miles and still counting. I was scared at first. But now I am a believer.
70 mpg, cruisin at 60 mph.

[ktmracer]

I have replaced these pads. Goto a certified Yamaha shop. These pads are used on the Yamaha Blasters. Most shops have them in stock and Yamaha OEM pads are $33.99. They work great also. I can send you a set if you can't find them...

O.K. guys, here I ask again. Has anyone changed the pads on the brakes yet?? I have been searching for some pads,and have not had any luck.I have found a few that look close to what is on the bike on ebay,but the pictures aren't that great to compare size to.I need to find pads soon,I have 5200 miles on my ride, and the brakes need a new set. please let me know if you have any input on this. Thanks.here are the pads from the front, I think the back is the same..

[alleykat]

I forgot to measure them before I put them back on, but I am doing maintainance on the bike this weekend and will check the size then.

Bow, these look like ours. Still need to size them.
http://www.ebay.com/itm/GY6-CHINESE-...11%26rk%3D4%26
From the ad...
"Measures 3" Long. About 1 5/8" Eye To Eye For The Two Holes."

All that I found for the Blaster look alot different..

[85highwall]

Yesterday I was enjoying the post-Hurricane Isaac weather in Mississippi on my bobber and my clutch cable broke as I was pulling out of a parking lot. Does anybody have any experience finding a replacement for the cable? So much for enjoying the Labor Day holiday with the wind in my face!

[ghost1133]

pulling out

[ghost1133]

Something happening here.
What it is isn't exactually clear.

[alleykat]

Yesterday I was enjoying the post-Hurricane Isaac weather in Mississippi on my bobber and my clutch cable broke as I was pulling out of a parking lot. Does anybody have any experience finding a replacement for the cable? So much for enjoying the Labor Day holiday with the wind in my face!

My cable hasn't snapped yet (knock on wood). But it looks like this is the replacement I will try and use. Matter of fact, I may go ahead and take mine off to measure and get a backup. Do you have yours off yet? Here's the link...

http://www.whygostock.com/products/C...-Upgraded.html

[ghost1133]

just ride the shit out of it,

http://s1074.photobucket.com/albums/...nt=ridewmv.mp4



Im' doing about 70

Top speed, I think.

My boots are older then you are.

P.S.
Those boots I have on, I bought 35 years ago. Now am I old or what?

[alleykat]

Top speed, I think.

My boots are older then you are.

P.S.
Those boots I have on, I bought 35 years ago. Now am I old or what?

Sorry, my combat boots are 40 years old, lol.
http://www.mychinamoto.com/forums/sh...ll=1#post38534