Results 3,481 to 3,490 of 6336
|
-
#3481 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Feb 2013
- Location
- las vegas, nv
- Posts
- 198
05-15-2013, 07:19 PMnot positive, but if you peel back the shrink tube a little bit you might find the cut end
crelow wire.jpgLast edited by chruk bashre; 06-27-2013 at 04:29 PM.
-
#3482 Re: Dong Fang DF 250 RTB Bobber Information05-15-2013, 10:02 PM
Got some new bags for the bike. Here's some pics.
100_0837.jpg100_0838.jpg100_0839.jpg
-
#3483 Re: Dong Fang DF 250 RTB Bobber Information
-
#3484 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Apr 2012
- Location
- Central Texas
- Posts
- 161
05-16-2013, 04:17 AMWhy do you say (never again)? Is it hard to remove and reinstall a tank?
On a side note I did check my drain screw at the bottom of my carb bowl and it is tight. Not sure what was dripping from the drain hose but I don't think it was gas. I took a drop and lit it and it did not light on fire. Maybe condensation?
-
#3485 Re: Dong Fang DF 250 RTB Bobber Information
-
#3486 Re: Dong Fang DF 250 RTB Bobber Information
-
#3487 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Aug 2011
- Location
- texas
- Posts
- 266
05-16-2013, 04:58 AMheed the warning get it kreemed professionally asap
-
#3488 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Apr 2012
- Location
- Central Texas
- Posts
- 161
05-16-2013, 06:16 AMSorry to hear that. It seems from this thread that the stock battery only lasts about a year. Mind did. But good part is a new battery is as low as $40 if you dont mind modding the battery box a bit. If you dont there is always the high end lithium ion battery out there for around $100.
If you look back a few pages you can see the battery I bought. Perfect fit except I had to dremel out a slot for the vent enxtension on the new battery. Bike starts first time every time now and my headlight is noticably brighter.
-
#3489 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Apr 2012
- Location
- Central Texas
- Posts
- 161
-
#3490 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Apr 2012
- Location
- Central Texas
- Posts
- 161
05-16-2013, 06:23 AMGot ya, well I never removed mine but it appears to leak from where the bolts attach to the tank so dont blame yourself for overtightening them. It may not have been your fault. Sometimes they just leak I think, just from vibration alone.
Dan said you can get it kreemed but not sure I want to go that route. My brother said to just have a welder weld a seam around the bolts. Not too crazy about that idea either. I would think this would blister the inside of the tank and cause problems later.
Third party tank is what I really want if I can find one that will drop fit and not cost a fortune.
« Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
Tags for this Thread |
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions