Results 3,301 to 3,310 of 6336
|
-
#3301 Re: Dong Fang DF 250 RTB Bobber Information04-07-2013, 09:49 PM
Hey all. I did the 35t sprocket today.. What a total pain in the A$$ it was. Took me all day because I cut my chain too short haha. I ended up getting the links that I broke out to reattach securely and all is well. I bought a nice pallet jack style bike lift from harbor freight to lift the bike... the thing is awesome. Anyway I figured out why my tail light isnt working. My fender is rubbing against the tire!!!! (ever so slightly). Its rubbing directly where the wire for the tail light come down through the fender on the 2012 model. Wires are shot.. tire ripped them to shreds. I tried to bend the fender up but Ive had no luck at all. Any suggestions
-
#3302 Re: Dong Fang DF 250 RTB Bobber Information04-07-2013, 11:33 PM
Remount the light on the left side like the chopper boys and rewire it.
-
#3303 Re: Dong Fang DF 250 RTB Bobber Information04-07-2013, 11:56 PM
Fresh oil now and the bike has only been started a couple of times without riding it due to the frigid conditions to preserve my battery. I'm not sure what is in the OEM filter but I am going to cut it open and look. This may have happened from opening up the flow between the crankcase and the termination point. I may put the OEM stuff back on and do a vacuum test to tell if the OEM configuration was more restrictive. Either way my bike is fine and it is running smooth as silk. After I corrected the way I shifted to neutral it has been wonderful to ride. My right front blinker is starting to act funny now though. So, when I am riding it and turn on the rt blinker only the rear works, but when it's sitting still running they all work. Gonna buy some new LED bulbs for them. I haven't had any issues with my rear tail light bulb, even on my side mount plate!
-
#3304 Re: Dong Fang DF 250 RTB Bobber Information04-08-2013, 12:32 AM
If your interested in doing it for under $20 look at some of my previous post with pics on how to do this easily. You really just need some good stainless steel flat stock (I got my stock from a retail shelf and a drill and die grinder/air grinder. Something like this~ http://www.harborfreight.com/catalog.../category/426/
Only reason I'm doing "HF" for info on tools is because they have it in stock, it's cheap, if it breaks in 24 hours you can return it for your money back, for that matter, if it breaks in 90 days they will give your money back EVEN if you dont buy the warranty!
-
#3305 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Feb 2013
- Location
- las vegas, nv
- Posts
- 198
04-08-2013, 06:17 AMskull- was the dipstick and drain oil also white stuff contaminated?
-
#3306 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Feb 2013
- Location
- las vegas, nv
- Posts
- 198
04-08-2013, 06:19 AMi found a happy home for my horn. next is to find the perfect sounding one at one of the local junkyards.
horn.jpg
-
#3307 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Feb 2013
- Location
- las vegas, nv
- Posts
- 198
04-08-2013, 06:38 AMLast edited by chruk bashre; 06-27-2013 at 03:40 PM.
-
#3308 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Feb 2013
- Location
- las vegas, nv
- Posts
- 198
04-08-2013, 05:38 PMLast edited by chruk bashre; 06-27-2013 at 03:41 PM.
-
#3309 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Feb 2013
- Location
- las vegas, nv
- Posts
- 198
04-08-2013, 05:51 PMcool, i just noticed the horn in the background. i like it. i like it alot.
SAISintake.jpg
-
#3310 Re: Dong Fang DF 250 RTB Bobber Information04-09-2013, 03:34 AM
No, it came out as expected. Gold with a bit of silvery sheen to it, the plug had a silvery/gray color "sludge" to it. Not a glob but enough to cover the surface. I let the bike drain for about an hour and re-installed the new oil and ran the fill check. Looks good and is running super smooth!
« Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
Tags for this Thread |
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions