Results 781 to 790 of 6336
|
-
#781 Re: Stock Main Jet Sizes?
- Join Date
- Jun 2011
- Location
- Jackson,ms
- Posts
- 43
06-27-2011, 02:11 AMIt looks like some kind of recirculateing system for emissions. If this doesn't hurt anything I think I am going to get an aluminum hose and run it down.
06 Gsxr 750, DF250rtb
-
#782 Re: Stock Main Jet Sizes?
- Join Date
- Apr 2011
- Location
- minnesota
- Posts
- 32
06-27-2011, 02:42 AMit is the secondary air injection, make a plate with a gasket and block it off.
-
#783 Re: Stock Main Jet Sizes?
- Join Date
- Jun 2011
- Location
- Jackson,ms
- Posts
- 43
06-27-2011, 02:50 AMAir injection for what? It went into some kind splitter one hose went no where the other back in the intake.
06 Gsxr 750, DF250rtb
-
#784 Re: Bobber
- Join Date
- Jun 2011
- Location
- Texas
- Posts
- 9
06-27-2011, 02:52 AMHey guys, I've been reading all over this thread and have obtained a lot of really useful information. I live in Texas, and I'm currently saving up to purchase this bike from Scooter Depot.
Barnone, I have a question for you. How exactly did you rejet the carb? Did you just switch out the 88 for the 100, or did you switch out any other jets? :P
-
#785 Re: Bobber
- Join Date
- Jun 2011
- Location
- Texas
- Posts
- 9
06-27-2011, 02:55 AMOh, and what top speeds are y'all getting with your bikes? Can it go at highway speeds?
-
#786 Re: Bobber
- Join Date
- Jun 2011
- Location
- Jackson,ms
- Posts
- 43
06-27-2011, 03:01 AMMine has a top GPS speed of 65 with a 100 jet, 35t sprocket and that hose I still don't know the name of off.
06 Gsxr 750, DF250rtb
-
#787 Re: Bobber
- Join Date
- Jun 2011
- Location
- Texas
- Posts
- 9
06-27-2011, 03:03 AMWas that the only jet you switched out? Is it difficult to switch them out? ...and one more question (lol)... do carb jets need to be regularly replaced, or is it essentially an "upgrade"?
-
#788 Re: Bobber
- Join Date
- Jun 2011
- Location
- Jackson,ms
- Posts
- 43
06-27-2011, 03:06 AMMine came with a 105 jet, which I an going to switch back. It is just an upgrade thing. You should not have to do it again.
06 Gsxr 750, DF250rtb
-
#789 Re: Bobber
- Join Date
- Jun 2011
- Location
- Jackson,ms
- Posts
- 43
06-27-2011, 03:07 AMYes that's the only one I did and it Is very easy.
06 Gsxr 750, DF250rtb
-
#790 Re: Bobber
- Join Date
- Jun 2011
- Location
- Texas
- Posts
- 9
06-27-2011, 03:09 AMI just need to be sure that I can travel at highway speeds, so anything that can up my top speed would be great.
« Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
Tags for this Thread |
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions