Results 2,461 to 2,470 of 6336
|
-
#2461 Re: Dong Fang DF 250 RTB Bobber Information
-
#2462 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Apr 2012
- Location
- Central Texas
- Posts
- 161
-
#2463 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Jul 2011
- Location
- Houston
- Posts
- 31
-
#2464 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Sep 2012
- Location
- Lexington KY
- Posts
- 8
09-19-2012, 03:37 PMHello all. I have read the thread and ordered a bobber based on the reviews. (Pictures to follow) When I got mine I pulled the EPA stuff and relocated the ignition switch. Bike now doesn't idle. It will die if no throttle. Unless I have a very small amount of choke on or a small amount of throttle. I assume it is just the Carb adjustment screw needs to be tuned, but I haven't been able to tune it. I have read a few techniques. I am currently on tighten completely then out two turns then adjust with 1/2 turns. I have not broken down the carb for the washer mod nor have I changed the spark plug. An tips on adjusting that screw?
-
#2465 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Sep 2011
- Location
- Joliet, IL
- Posts
- 188
-
#2466 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Sep 2012
- Location
- Lexington KY
- Posts
- 8
09-19-2012, 04:11 PMThanks I am enjoying, just have a few nice days in a row and would like to ride. I used original gasket in descent shape and 16g sheet to Fab a cover. I then used a screw for vaccum.
-
#2467 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Sep 2011
- Location
- Joliet, IL
- Posts
- 188
-
#2468 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Sep 2012
- Location
- Lexington KY
- Posts
- 8
09-19-2012, 06:00 PMI'll post some pics tonight. Just hoping to get an action shot.
-
#2469 Re: Dong Fang DF 250 RTB Bobber Information09-19-2012, 06:50 PM
Well I did it.. I purchased the brake pads off ebay..they fit exactly. no more worries. Thanks for the assist and I am pleased I can stop now.Still have to work on getting the new clutch cable made.. gonna call them next week and get an order placed.
-
#2470 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Aug 2011
- Location
- texas
- Posts
- 266
09-19-2012, 07:04 PMrun , it sounds like you only need to speed up your IDLE - sideways screw , dont mess with idle mix screw-forward facing
even if adjusting mix you need have it so it will sit there and idle well , to be able to set the mix properly
so just start it while sitting on it reach down with shorty screw driver and speed up idle ( by your right knee ) untill it keeps running
I believe your screw may be leaking air , go to local autoparts get a vacume plug cap (about 75 cents) get rid of screw (shoulda done that be4 start adjusting screws :p )
« Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
Tags for this Thread |
Prime Сasual Dating - Real-life...
Yesterday, 08:19 AM in Off Topic Discussions