Results 1,481 to 1,490 of 6336
|
-
#1481 Re: Dong Fang DF 250 RTB Bobber Information12-14-2011, 05:13 AM
You would be surprised what dope heads will steal to sell or trade to get there fix.I've seen crack heads steal potted plants off peoples porches to try and trade for crack.My friend went on vacation, and when they returned home,all there fresh planted trees and shrubs were gone.Pulled right out of the ground in the wee hours of the morning.No one saw anything.They were in and out in minutes.That's why most of us in the south carry guns.Damn thieves!I'd like to retire the guns and take that weight off me when I go out.
-
#1482 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Dec 2009
- Location
- mostly Shanghai, sometimes northern California
- Posts
- 3,222
12-14-2011, 05:28 AMThis is so true! Recently in my sister's neighborhood in a middle-class community north of the Golden Gate Bridge, all of a sudden the whole area sounded like a bunch of Harleys converging on Sturgis. Overnight, dozens of cars parked in driveways or on the street had their mufflers disconnected. This was not to steal their mufflers, but their catalytic converters, which crackheads know contain small amounts of platinum and other precious metals and can be traded for maybe $20 down on the waterfront in Oakland.
Free enterprise being what it is, there's now a shop in her town called The Cat House whose principal business is replacing stolen catalytic converters (and welding them in line) at about $400 a pop.
That's some sick shit.
cheersjkp
Shanghai
2010 JH600 "Merkin Muffley" (in Shanghai)
2000 KLR650 "Feezer Ablanalp" (in California)
-
#1483 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Aug 2011
- Location
- louisiana
- Posts
- 85
12-14-2011, 07:54 AMin my opinion, people that steal things from other people should have thier hands cut off so they can't steal anything else, and if that's the penalty for theft it might prevent someone from stealing something that might be thinking about it.
on another note, i just ordered a west eagle seat, and some mounting brackets, and some 5 inch springs off of ebay, along with a handlebar mount for my GPS from amazon, pics will be coming as soon as i get them. i should have them all installed by christmas.
-
#1484 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Dec 2011
- Location
- orlando/miami, florida
- Posts
- 72
12-17-2011, 12:45 AMhas anyone ever done a valve adjustment on this bike or any other similar engine or same engine?
2011 250rtc
2004 m3 e46
-
#1485 Re: Dong Fang DF 250 RTB Bobber Information12-17-2011, 03:33 AM
Of course we have.
video at http:http://www.youtube.com/watch?feature...&v=KVmO9pVFYN8Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#1486 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Aug 2011
- Location
- texas
- Posts
- 266
12-18-2011, 09:22 AMaye quite easy , open the top make sure find top dead center and adjust valves till you can barely make em "tick" when forcibly rocking em by hand , tightn lock nut , make sure they still "tick" when rock em , put top back on for another thousand miles
tighter is good , but to tight is bad , thats why I say make sure they still tick at least a bit
-
#1487 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Dec 2011
- Location
- orlando/miami, florida
- Posts
- 72
12-18-2011, 04:31 PMfunny story I called sunny depot and told them about the problem I was having with my bike chugging along then shutting down after riding too long, they told me I needed a valve adjustment and when I asked them about the procedure they told me it was something only a proffessional mechanic should do. what do you guys think?
Here is my recap of what I understood for what I should do:
1/2. make sure engine is very very COLD
1. remove battery connection and turn gas nob( full/empty/reserve ) to empty
2. remove fairings and gas tank if necessary
3. remove spark plug (is this necessary?)
4. remove the big side and smaller top side cranckcase cover
5. remove top engine case.
6. turn the nut in the cranckcase counterclockwise until you see a t mark ( or second mark meaning top dead center ) and align it with another line that will be seen in the top hole that is stationary
7. at this point can take a look at both the valves and check their clearances with a filler gauge ( scooter depot told me intake .006 exhaust .008 )
8. tighten or loosen valves to recommended specs
9. put everything back on and start up
Is this the procedure? necessary to take spark plug off? also is number 6 and 7 correct? I feel like those two steps are the most important and I dont want to mess it up
yea sorry guys just fixing up the bike and almost done gathering everything for the rtc information thread
also which is the exhaust and intake valve? Im assuming the exhaust is the one to the front, the intake the one towards the back2011 250rtc
2004 m3 e46
-
#1488 Re: Dong Fang DF 250 RTB Bobber Information12-18-2011, 05:25 PM
the motor used in the DF bikes and the CCW bikes are very similar, adjust for the different clearances for the bikes but the procedure should be the same.
just remember that the intake valve is closest to the carb and the exhaust valve is the one closest to the exhaust pipe.
Good luck
Valve AdjustmentGardo northern NJ/NYC
CCW tha Heist tha Widow
CCW tha Misfit (tha Wraith)
50 State legal and Worldwide
CCW Heist Riders
-
#1489 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Dec 2011
- Location
- orlando/miami, florida
- Posts
- 72
12-18-2011, 05:50 PMso it sounded right? also before all of this drain the oil right? I just found out the hard way lol by pulling off the flywheel cover and oil started slowly leaking out also thanx a lot for the document looks promising, so how would i know if I am in the compression stroke when setting the timing mark? there is only one tdc mark that I have to align right?
2011 250rtc
2004 m3 e46
-
#1490 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Dec 2011
- Location
- orlando/miami, florida
- Posts
- 72
12-18-2011, 07:09 PMalso what do you guys think about iridium spark plug upgrade? ngk copper plg -2.50 ngk iridium plg -9.09 not that much but my bike does have a very hard time of getting up to temp, even with choke on
2011 250rtc
2004 m3 e46
« Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
Tags for this Thread |
A Working VPN Solution?
04-11-2024, 03:10 AM in Off Topic Discussions