Results 4,141 to 4,150 of 6336
|
-
#4141 Re: Adjusted valves, and messed with the carb. UPDATE08-04-2013, 10:36 PM2011 Yamaha Star 250
2010 DF 250 Bobber (sold)
2009 Triumph Bonneville T100
1993 Kawasaki Vulcan88(sold)
-
#4142 Re: Adjusted valves, and messed with the carb. UPDATE
- Join Date
- Aug 2011
- Location
- texas
- Posts
- 266
08-04-2013, 10:39 PMyour right that low of gearing you should be pinging against the rpm cap constantly , checked your fuel filter ? make sure choke is all the way off ? checked spark plug ? checked fuel line for good flow ? are brakes dragging ?
-
#4143 Re: Adjusted valves, and messed with the carb. UPDATE
- Join Date
- Jul 2013
- Location
- Colorado Springs
- Posts
- 14
-
#4144 Re: Adjusted valves, and messed with the carb. UPDATE08-05-2013, 12:06 PM
that's a pretty neat look.
living in NY, i must admit whenever i used to see those (place pejorative ethnic group here) cruising in their IROC's, radiating some neon colors;
while i was wondering why they needed the attention, i was secretly thinking it was pretty darn cool looking
-
#4145 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Nov 2012
- Location
- Madison, WI
- Posts
- 23
08-05-2013, 05:24 PMMy clutch cable snapped! How do I get a replacement?
-
#4146 Re: Dong Fang DF 250 RTB Bobber Information
-
#4147 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Jul 2013
- Location
- Colorado Springs
- Posts
- 14
08-05-2013, 09:15 PMSo after adjusting my valves to spec, I can't get the bike to idle correctly, ides nice while leaning on the kickstand but as soon as I stand it up and turn the wheel straight it idles waaaay too fast. Can't seem to get it adjusted right
-
#4148 Re: Dong Fang DF 250 RTB Bobber Information08-05-2013, 10:00 PM
If you changed your bars, I can that happening.I bought one from a triumph dealer online at first then found a local triumph shop. You basically have to look at the length and then the barrel nipple ends to make sure they are the same.
I found my first one on ebay .
The problem could become reoccurring if you do not lubricate the ends. I noticed that there is not any lube on these bikes when you first get them. That is why mine broke the first time. and the second until I was made aware of why it was happening. Now lubed and trouble free.
-
#4149 Re: Dong Fang DF 250 RTB Bobber Information08-05-2013, 10:03 PMVince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#4150 Re: Dong Fang DF 250 RTB Bobber Information08-05-2013, 10:15 PM
Got the 30 tooth rear sprocket installed and tested a little. I don't have a long straight away here in the mountains close to our cabin so will have to try a high speed run tomorrow when I have more time. I did get close to 30 MPH in first gear which is nice and did not have any problem going up my steep gravel driveway.
0805131538-00.jpg
The sprocket sure looks small. So I am now running a 30/13 vs the stock 45/13. Big difference and I believe a keeper but will do more testing before recommending it. I think the drive ability is improved.Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
« Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
Tags for this Thread |
Prime Сasual Dating - Real-life...
04-27-2024, 08:19 AM in Off Topic Discussions