Dong Fang DF 250 RTB Bobber Information

**birdmove** · 03-31-2015, 08:53 PM

Did you have to cut off some chain links to go with that sprocket? Does the stock chain have a master link, or is it an endless chain?

**heist222** · 03-31-2015, 09:22 PM

I have the same question about the chain length fitting the smaller sprocket. My chain has a master link so it should be a problem getting it off

**barnone** · 03-31-2015, 10:58 PM

Originally Posted by heist222

Where can I get the 32 tooth sprocket?

Change the part number to JTR279-32

http://www.amazon.com/s/ref=nb_sb_no...ords=jtr279.32

**barnone** · 03-31-2015, 11:09 PM

Originally Posted by birdmove

Did you have to cut off some chain links to go with that sprocket? Does the stock chain have a master link, or is it an endless chain?

Seem to remember that I had to take some links off. It is a master link chain. Get some 520 chain master link repair kits in case you screw up.

download.jpg
http://www.amazon.com/PARTS-UNLIMITE...ain+repair+kit

Got a chain breaker at Harbor Freight.
image_16332.jpg
http://www.harborfreight.com/heavy-d...ker-66488.html

**culcune** · 04-01-2015, 12:49 PM

Originally Posted by barnone

I've been off in Ural and Kawasaki land.
Attachment 16932

Attachment 16933

The cows seem to appreciate your bikes!

**barnone** · 04-01-2015, 01:01 PM

Originally Posted by culcune

The cows seem to appreciate your bikes!

They are wanting some cow pellets.

0321150916b.jpg

Likewise some that we have at our place here in town. Our new grandson is not impressed with the heifers.

**beniamin82** · 04-01-2015, 07:04 PM

Is this dongfang? Finally avaible in Poland.
http://www.ccw.com.pl/

**barnone** · 04-01-2015, 07:08 PM

Originally Posted by beniamin82

Is this dongfang? Finally avaible in Poland.
http://www.ccw.com.pl/

That is a CCW Heist and not a Dong Fang but it is a very similar motorcycle.
There is another thread on My China Moto for the Heist.
http://www.mychinamoto.com/forums/sh...-CCW-tha-Heist

**freezerboy** · 04-01-2015, 08:28 PM

my df250 carb is running full force and the idle screw does not do anything. Any suggestions would be appreciated. thanks

I took it apart and cleaned it with gum out. Could the accelerator pump be stuck?
The idle screw turned clockwise slows the engine normally?

**Nick Papageorgio** · 04-01-2015, 09:05 PM

This is just a stretch, but it happened on mine... Check where the throttle cable enters the hand grip area. Mine got pulled out a ways, and then stuck out. It made the motor run at WOT. All I had to do was pull it out a little further and re-seat it back into the opening.

THROTTLE.jpg